Dell IDRAC6, Руководство пользователя, Страница: 337 / 472

RACADM Subcommand Overview
337
NOTE:
See "iDRAC6 Enterprise Property Database Group and Object Definitions"
for information on the group and object to be used with this command.
Input
Table A-3 describes the config subcommand options.
Output
This subcommand generates error output upon encountering either of the
following:
• Invalid syntax, group name, object name, index, or other invalid
database members
• RACADM CLI failures
This subcommand returns an indication of how many configuration objects
that were written out of how many total objects were in the
.cfg file.
Table A-3. config Subcommand Options and Descriptions
Option Description
-f The -f < filename > option causes config to read the contents of the file
specified by < filename > and configure iDRAC6. The file must contain data
in the format specified in "Configuration File Syntax" on page 265.
-p The -p , or password, option directs config to delete the password entries
contained in the config file -f < filename > after the configuration is complete.
-g The -g < groupName >, or group, option must be used with the -o option.
The <
groupName
> specifies the group containing the object that is to be set.
-o The -o <
objectName
> <
value
>, or object, option must be used with the -g
option. This option specifies the object name that is written with the
string <
value
>.
-i The -i < index >, or index, option is only valid for indexed groups and can be
used to specify a unique group. The index is specified here by the index
value, not a
"
named
"
value.
-c The -c , or check, option is used with the config subcommand and allows you
to parse the .cfg file to find syntax errors. If errors are found, the line number
and a short description of what is incorrect are displayed. Writes do not occur
to iDRAC6. This option is a check only.