manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 235 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 235

Configuring and Using Virtual Media

235

The media is connected and the 

Status

 window is updated. 

10

Click 

Close

.

 

Disconnecting Virtual Media

1

Select 

Media

→

 

Virtual Media Wizard.

The 

Media Redirection Wizard

 appears. 

2

Click 

Disconnect 

next to the

 

media you wish to disconnect. 

The media is disconnected and the 

Status

 window is updated. 

3

Click 

Close

.

 

NOTE: 

When you launch the 

iDRACview

 and then log out of the Web GUI, 

iDRACView

 does not terminate and remains active.

Booting From Virtual Media

The system BIOS enables you to boot from virtual optical drives or virtual 
floppy drives. During POST, enter the BIOS setup window and verify that the 
virtual drives are enabled and listed in the correct order.

To change the BIOS setting, perform the following steps:

1

Boot the managed server.

2

Press <F2> to enter the BIOS setup window. 

3

Scroll to the boot sequence and press <Enter>.

In the pop-up window, the virtual optical drives and virtual floppy drives 
are listed with the standard boot devices.

4

Ensure that the virtual drive is enabled and listed as the first device with 
bootable media. If required, follow the on-screen instructions to modify 
the boot order. 

5

Save the changes and exit.

The managed server reboots.

The managed server attempts to boot from a bootable device based on the 
boot order. If the virtual device is connected and a bootable media is 
present, the system boots to the virtual device. Otherwise, the system 
overlooks the device—similar to a physical device without bootable media.

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов