Daikin DCM601A51, Руководство пользователя

Страница: 99 / 344

User’s Manual EM11A015B
intelligent Touch Manager
98
(4) Start radio button
Select to start the target.
(5) Pre-Cool, Pre-Heat radio button
Select either of the two radio buttons when using the Pre-Cool/Pre-Heat function.
Touch the Modify button and enter the setpoint in the Numerical Input dialog that appears. The
range of values you can enter is 16 to 32, in increments of 1°C.
These radio buttons are displayed only when the target is an indoor unit or area.
When Pre-Cool/Pre-Heat function is set up, the following confirmation dialog will appear as the
operation mode and setpoint set up in the A/C tab of the Events screen will be disabled. Touch
the Yes button to commit the setting.
• Pre-cool/Pre-heat function is a function that starts the air conditioners earlier than the time
set up in the schedule to make the room temperature reach the setpoint at the set time.
The function calculates the time to automatically start the air conditioners from the suction
temperature and setpoint. The start time is adjusted accordingly as the function learns
from repeated use.
• When Pre-Cool/Pre-Heat is set up for an area, the operation mode, the setpoint set up in
the Pre-Cool/Pre-Heat settings, and the order to start are sent to the management points
in the area at the set time. Be sure to exclude management points you do not want to
operate at set times or management points you do not want to modify their operation mode
or setpoint from the area.
• Pre-Cool/Pre-Heat is not possible if the Setback function is being used.
NOTE