manualshive.com logo in svg

Daikin D-BACS, Руководство по конструкции

Daikin D-BACS - это продукт, который обладает своим собственным "Руководством по проектированию". Вы можете скачать это руководство бесплатно на нашем сайте. Оно поможет вам разобраться с функционалом и настройками продукта. Посетите manualshive.com, чтобы скачать его прямо сейчас.

Поделиться
Скачать
background image

1.4 Names and Functions of Operating Part

129

Control Devices

1.4

Names and Functions of Operating Part

„

Display part DISPLAY (OPERATION MODE) Displays operating state.

ALL

OPTION

L

NOT

T

AVAILABLE

SET

FRESH UP

H HH

No..
CODE

UNIT No.

TEST

INDIVIDUALLY

C

F

12

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

1. "     " "     " "     " "     " DISPLAY

(VENTILATION CLEANING DISPLAY)
This is displayed when a Ventiair total enthalpy heat 
exchanger unit or other such unit is connected.

2. "       " DISPLAY (REFRIGERANT SYSTEM 

DISPLAY)
This indication in the square is lit while the 
refrigerant system is being displayed.

3. "      " DISPLAY (ZONE SETTING)

The lamp is lit while setting zones.

4. "         " DISPLAY (OPERATION MONITOR)

The lamp is lit while operation is being monitored.

5. " 

ALL

 " "     " " 

INDIVIDUALLY

INDIVIDUALLY

 " DISPLAY

The status displays indicates either batch functions 
or which zone or individual unit (or group) are being 
used.

6. OPERATION MONITOR

Each square displays the state corresponding to 
each group.

7. "          " DISPLAY (PRESET TEMPERATURE)

Displays the preset temperature.

8. "          " DISPLAY (MALFUNCTION CODE)

This displays (flashes) the content of errors when 
an error failure has occurred.In maintenance mode, 
it displays the latest error content.

9. "NOT AVAILABLE" DISPLAY (NO FUNCTION 

DISPLAY)
If a function is not available in the indoor unit even if 
the button is pressed, "NOT AVAILABLE" is may be 
displayed for a few seconds.

10. "           " DISPLAY (INSPECTION/TEST)

Pressing the maintenance/test run button (for 
service) displays this. This button should not 
normally be used.

SET

C

L

H

HH

HH

FRESH UP

CODE

CODE

UNIT No.

11. "    " "   " "   " "    " "    " "           " DISPLAY 

(VENTILATION STRENGTH/SET FAN 
STRENGTH DISPLAY)
This displays the set fan strength.

12. "      " DISPLAY (FAN DIRECTION SWING 

DISPLAY)
This displays whether the fan direction is fixed or 
set to swing.

13. "     " "      " DISPLAY (TIME TO CLEAN AIR 

CLEANER ELEMENT/ TIME TO CLEAN AIR 
FILTER)
Displayed to notify the user it is time to clean the 
air filter or air cleaner element of the group 
displayed.

14. "            " DISPLAY (OPERATION CODE AND 

UNIT NUMBER DISPLAY)
The method of operation (remote controller 
prohibited, central operation priority after-press 
operation priority, etc.) is displayed by the 
corresponding code.This displays the numbers of 
any indoor units which have stopped due to an 
error.

15. "     " DISPLAY (TIME NO.)

Displays the operation timer No. when used in 
conjunction with the schedule timer.

16. "          " DISPLAY (UNDER HOST COMPUTER 

INTEGRATED CONTROL)
While this display is lit up, no settings can be 
made. It lights up when the upper central 
machines are present on the same air conditioning 
network.

17. "          " DISPLAY (COOLING/HEATING 

SELECTION PRIVILEGE NOT SHOWN)
For zones or individual units (groups) for which 
this is displayed, cooling and heating cannot be 
selected.

18. "            " DISPLAY (TIME TO CLEAN)

It lights up when any individual unit (group) has 
reached the time for the filter or element to be 
cleaned.

19. UNIFIED STOP BUTTON

Press to stop all indoor units.

20. UNIFIED OPERATION BUTTON

Press to operate all indoor units.

21. OPERATION LAMP (RED)

Lit white any of the indoor units under control is in 
operation.

22. "   " "   " "   " "   " "   " "   " "   " DISPLAY 

(OPERATION MODE)
Displays operating state.

No.

No.

TEST

Содержание D-BACS

























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D-BACS

Gantner E Series Communications Manual preview
E Series
Бренд: Gantner Страницы: 56
Handicare VR2 User Manual preview
VR2
Бренд: Handicare Страницы: 56
Salda TPC User Manual preview
TPC
Бренд: Salda Страницы: 16
Hanna Instruments HI 8001 Instruction Manual preview
HI 8001
Бренд: Hanna Instruments Страницы: 88
ICP DAS USA I-7000 Series Quick Start Manual preview
I-7000 Series
Бренд: ICP DAS USA Страницы: 6
Madas M16/RM N.C. DN 65 EEX Technical Manual preview
M16/RM N.C. DN 65 EEX
Бренд: Madas Страницы: 44
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Бренд: Madas Страницы: 6
Madas EVP/NC Manual preview
EVP/NC
Бренд: Madas Страницы: 11
RADVision Scopia XT1000 Quick Setup Manual preview
Scopia XT1000
Бренд: RADVision Страницы: 3
RADEMACHER 2696 Instruction Manual For The Electrical Connection And For Commissioning preview
2696
Бренд: RADEMACHER Страницы: 48
R&M STAGEMAKER SM1 Technical Manual preview
STAGEMAKER SM1
Бренд: R&M Страницы: 53
RadioMaster MT12 Instruction Manual preview
MT12
Бренд: RadioMaster Страницы: 49
X10 SUPERREMOTE UR19A Addendum preview
SUPERREMOTE UR19A
Бренд: X10 Страницы: 3
Xantech MRC88M Installation Instructions Manual preview
MRC88M
Бренд: Xantech Страницы: 102
Xantech MRC88 Feature Descriptions preview
MRC88
Бренд: Xantech Страницы: 17
X10 CK11A Code List preview
CK11A
Бренд: X10 Страницы: 2
YASKAWA Z1000 CIMR-ZU*A Series Programming Manual preview
Z1000 CIMR-ZU*A Series
Бренд: YASKAWA Страницы: 340
ETC Echoflex ELED2 Installation Manual preview
Echoflex ELED2
Бренд: ETC Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды