COMCOLOR FW 5000, Руководство пользователя

Страница: 29 / 186

Preparation
ComColor FW Series User’s Guide
27
1
Pull a tray out, toward the front.
2
Hold the lever of the paper feed guide,
and pull it forward to spread the paper
feed guide until it stops.
3
Move the stopper to make space.
Move the stopper by holding both sides.
4
Load the paper.
When using paper with different characteristics on
the front and back sides, load the printing side face
down. Do not load too many sheets.
When loading the paper, be careful not to let its edge
contact the paper guides to prevent it from being bent.
5
Move the paper feed guide and
stopper against the edge of the
paper.
6
Push the tray back into the machine.
7
On the operation panel, check the
tray settings.
When you have switched to a different type or size of
paper, update the feed tray settings. (p. 1-7 "Paper
Selection")
Loading Paper in the Feed
Trays
• The machine detects the size of the paper
based on the stopper position. Be sure to
move the guide and stopper against the
edge of the paper.
• To set A3 paper or B4 paper, install the A3/B4
paper guide properly for each type. Pinch
both sides of the A3/B4 paper guide, slide it
out and then slide it into the appropriate hole
for the desired paper size.
When using B4 paper
B4 A3