COMCOLOR FW 5000, Руководство пользователя

Страница: 145 / 186

Face Down Finisher
8
ComColor FW Series User’s Guide
8-3
The items described below can be set when the
face down finisher is connected.
Stack each set of printed documents slightly apart
from one another when printing multiple copies.
[OFF]
Offset output is not performed.
[Between Sorts]
Each set of printed documents specified in [Sort] is
stacked slightly apart from one another.
[Between Jobs]
Each finished print job is stacked slightly apart from one
another.
List of Settings
Printer Driver
Setting
item
Description See
[Finishing] tab
Offset
Output You can stack each set of
printed documents slightly
apart from one another
when printing multiple
copies. p. 8-3
Staple Select the stapling
position. p. 8-4
[Advanced] tab
Program Specify this when the
number of required copies
varies by group (such as
corporate division or
class). p. 3-25
Offset
Output
(Program) You can stack each set of
printed documents slightly
apart from one another to
create separation. p. 8-6
• When [Staple] is grayed out in the [Finishing]
tab, make sure that [Printer Configuration] in the
[Environment] tab on the properties screen has
been configured correctly. (p. 3-26 "Printer
Configuration")
Copy Mode
Setting
item
Description See
Program Specify this when the
number of required copies
varies by group (such as
corporate division or
class). p. 1-18
Offset
Output
([Program]) You can stack each set of
printed documents slightly
apart from one another to
create separation. p. 8-7
Separation Specify where to insert slip
sheets between printouts. p. 1-21
Offset Output
([Separation]) You can stack each set of
printed documents slightly
apart from one another to
create separation. p. 8-6
Staple Configure the staple
settings. p. 8-6
Printer Driver Settings
Offset Output
• When [Program] is configured, [Offset Output] is
[OFF]. (p. 3-25 "Program")
• This setting is not available for paper sizes that
cannot be output to the face down finisher.
• When using the face down finisher, you cannot
use this setting with stapling.
• When [Mixed Size Original] is configured,
[Offset Output] is [OFF]. (p. 3-11 "Mixed Size
Original")