Climax SUPER 32-DT35A, Руководство пользователя, Страница: 58 / 62

55
7.6 SUPER 32-DT35A Programming Command Table
DTMF
CHARACTER
COMMANDS
DTMF
ACK
COMMAND OPERATION
TERMI-
NATOR
DTMF
ACK
DEFAULT
00# Bi
To Set Telephone Dialing Report Number (001-200)
Enter: Dialing Number Se * + Event
Telephone Number
Note: Dialing Number Sequence: 001-200
Symbol: *
Event Number: 00-19 (See 6.5. Dial Call
Reporting Table)
Telephone Number: maximum 20 digits
Example:
001*0027912518 (001 represents that it
’s
the 1
st
telephone number; 00 represents
Panel Emergency; 27912518 represents the
dialing number)
To Set Caller ID (201-400)
Enter: Caller ID Se * + Caller ID
Note: Caller ID Sequence: 201-400
Symbol: *
Caller ID: maximum 20 digits
Example:
201*27912518 (201 represents that it
’s
the 1
st
Caller ID; 27912518 represents the
Caller ID)
# Bi Null
01# Bi Telephone number 1 # Bi No number
02# Bi Telephone number 2 # Bi No number
03# Bi Telephone number 3 # Bi No number
04# Bi Telephone number 4 # Bi No number
05# Bi Telephone number 5 # Bi No number
06# Bi Telephone number 6 # Bi No number
08# Bi
To Set Report Sequence
0 = Alternate Reporting Sequence,
1 = One-by-One Reporting Sequence
# Bi
Alternate Reporting
Sequence
10# Bi Global Account Number, 4 to 12 digits # Bi No account number
11# Bi 4-12 digits Account number 4 (Tel. Number 1) # Bi No account number
12# Bi 4-12 digits Account number 2 (Tel. Number 2) # Bi No account number
13# Bi 4-12 digits Account number 3 (Tel. Number 3) # Bi No account number
14# Bi 4-12 digits Account number 4 (Tel. Number 4) # Bi No account number
15# Bi 4-12 digits Account number 5 (Tel. Number 5) # Bi No account number
16# Bi 4-12 digits Account number 6 (Tel. Number 6) # Bi No account number
18# Bi
To Set Report Format (when to stop reporting)
Reporting terminated after:
0 = One successful digital and one successful
speech report
1 = One successful report
2 = All report successful
# Bi
One successful
digital and one
successful speech
report
20# Bi
To Set Reporting Method for Tel. Number 1-6
0 = Contact ID, 1 = Scancom, 2 = Tunstall,
3 = Speech, 4=VRI, 6 = Franklin 4 + 2,
8 = Auto CID/Franklin 4-2,
9 = Dial Call Reporting
(Note: When any of the command 20-26 is set to 9
= Dial Call Reporting, the Reporting Method will be
globally changed to Dial Call Reporting, and Tel.
Number 1-6 programmed with command 01-06 will
be disabled) # Bi
Dial Call Reporting