Climax SUPER 32-DT35A, Руководство пользователя, Страница: 15 / 62

12

Factory Default is set as ( 0 ), OFF .
<NOTE>

If the RESET BUTTON is not pressed
within 15 minutes, SUPER 32-DT35A will
send one more
Help Call report to
summon help and inform the Monitoring
Center that no help has arrived within the
past 15 minutes.
Command 34
Emergency Button Enable

The HELP BUTTON can be enabled or
disabled to send an Emergency alarm
report:
Function
Selection
Result
(0)
OFF
(
disable
)
(1)
ON
(
enable
)
 Factory Default is set as (1), ON .
<NOTE>

When this function is programmed as OFF ,
the HELP BUTTON is deactivated.

When this function is programmed as ON ,
the HELP BUTTON is activated. When
pressed, it will send an Emergency alarm
report to the Monitoring Station.
Command 35
Silent Mode

SUPER 32-DT35A can be selected to
operate in Silent Mode. This will mute all
normal operation
warning beeps , guard
time tone , key tone and ring .
<NOTE>

In silent mode, the speaker still functions
normally for two-way voice communication
and voice message playback.
Function
Selection
Result
(0)
ON
(Silent)
(1)
OFF
(Normal)

Factory Default is set as ( 0 ), OFF .
Command 37
AC Fault Report

The SUPER 32-DT35A can be
programmed to send a Fault Report when
an AC power failure is detected:
Function Selection Result
(0)
OFF
(Send no Report)
(1)
ON
(Send Report)
 Factory Default is set as ( 1 ), ON .
<NOTE>

Reporting will only be made after a
continuous one hour of AC Fault
condition is detected.
Command 38
Follow-On & Call-Back Function

The Command is available for Digital
Reporting Methods (when Command #20 -
#26 is set as (0), (1) or (2))
Function Selection Result
(0) Follow-On
(1) Call-Back
(2) Follow-On & Call-Back

Factory Default is as (0), Follow-On .

When this function is programmed as ( 0 ),
after a successful reporting to the
Monitoring Center, SUPER 32-DT35A will
automatically enter the specific Follow-On
mode as specified by Command (
45 ).