Climax SUPER 32-DT35A, Руководство пользователя, Страница: 5 / 62

2
5. ORANGE LED
—
Flashes once every two seconds:
Line failure.
—
Two QUICK FLASHES every 2
seconds: Supervision failure.
6. GREEN LED
— ON: AC Power is ON.
— Flashes once every second: AC
Power failure
— Flashes once every 2 seconds:
Panel or Device Low battery
7. Speaker
REAR VIEW
8. Power Button
—
Press the button once to power
on/power off SUPER 32-DT35A.
9. DC Jack
—
DC 12V 1A power adapter
connection.
10. Programming Telephone Jack
marked
— The programming cable (QT cable A)
needs to be plugged into this jack
and connected to a PC for PC
Programming.
— The Local firmware update cable
(QT cable B) needs to be plugged
into this jack and connected to a PC
for Firmware Update.
(Refer to 2.5. Programming cable
and Local Firmware Update cable
for details.)
11. Phone Jack marked
—
Telephone unit connection
12. Line Jack marked
— Phone line connection from wall
13. Local Programming Mode Slide
Switch
—
Slide the Switch to “Program”
position to enter local programming
mode
while in two-way
communication.
14. Learn Button
— Press & hold for 6 sec: enter
Learning Mode
—
Press & hold for 16 sec: disable
mobility setting
2.2. The Power Supply
 An AC power adapter is required to
connect to a wall outlet. Be sure only to
use an adapter with the appropriate AC
voltage rating to prevent component
damage. A DC 12V output and 1A adapter
is generally used to power SUPER 32-
DT35A.
 In addition to the adapter, there is a
rechargeable battery inside SUPER 32-
DT35A, which serves as a back-up in
case of a power failure.

During normal operation, the AC power
adapter is used to supply power to
SUPER 32-DT35A and at the same time
recharge
the battery. It takes
approximately 72 hours to fully charge the
battery.

After power is supplied to SUPER 32-
DT35A, press the power button once to
power on the Control Panel.
2.3. Line Capture
 SUPER 32-DT35A features Master
Control over the telephone line. That
means, even if the phone line is engaged,
the SUPER 32-DT35A has the power to
circumvent the line and dial-out anyway.
<NOTE>

The Line Capture feature is only available
when household phones are connected
after the SUPER 32-DT35A wiring.