Climax SUPER 32-DT35A, Руководство пользователя, Страница: 11 / 62

8
beep, indicating successful
programming.
 The maximum interval between key
strokes
is 2 minutes. Otherwise,
commands will be ignored and SUPER
32-DT35A will automatically exit to Idle
Mode.
 Any erroneous programming must be
rectified and program again correctly.
Command 00
Dial Call Report Number & Caller ID

Command ( 00 ) can be used to assign a
unique telephone number to each alarm or
status event for dial call reporting. Up to
200 dialing numbers can be programmed.

Command ( 00 ) can also be used to
program up to 200 Caller ID(s).

When an incoming call matches with any of
the programmed Caller ID(s) (except for
the 11th Caller ID), SUPER 32-DT35A will
auto-answer the call without checking
access code or any button press.

SUPER 32-DT35A will match the
numbers starting from the last digit, and
verify 10 digits at the most.
For example, if a number string 321 is
programmed, SUPER 32-DT35A will
instantly pick up any call that has 321 as
the last 3 digits.
If a number string 17605851848 is
programmed, SUPER 32-DT35A will
instantly pick up any call that has
7605851848 as the last 10 digits. The first
digit "1" of the Caller ID will be ignored.

The 11
th
Caller ID is used to Enable/Disable
the system reporting function.
When SUPER 32-DT35A is in normal
operation with reporting function enabled,
calling the SUPER 32-DT35A with the 11
th
Caller ID will disable the system reporting
function.
When SUPER 32-DT35A reporting function
is disabled, calling the Control Panel with
the 11
th
Caller ID will enable the system
reporting function.

Up to 20 digits are allowed for each event
calling number and each Caller ID.
Function
Selection
Result
(001-200)
Set Dial Call
Reporting Phone
Number
(1
st
– 200
th
Dialing
Number)
(201-400)
Set Caller ID
(1
st
– 200
th
Caller ID)

To assign a dialing number to an event for
Dial Call Reporting:
Step 1: Enter 00 + # on the phone set, then
a short beep will be heart via the
phone set.
Step 2: Enter the Dialing Number Sequence
( 001-200 ), and then the * symbol,
followed by Event Number +
Telephone Number , and the #
symbol at the end to terminate
Function Selection

Example: 001*0027912518#

001 represents it being the 1
st
dialing number

00 represents the event number for
Panel Emergency (Please check
event number at
6.5 Dial Call
Reporting Table )

27912518 represents the dialing
number.
Step 3: A short beep will be heart via the
phone set if Function Selection is
successful.

To set a Caller ID:
Step 1: Enter 00 + # on the phone set, then
a short beep will be heart via the
phone set.
Step 2: Enter the Caller ID Sequence ( 201-
400 ) followed by the * symbol, and
then the Caller ID , and the #
symbol at the end to terminate
Function Selection.

Example: 201*27912518#

201 represents it being the 1
st
Caller ID.

27912518 represents the Caller ID
Step 3: A short beep will be heart via the