Climax SUPER 32-DT35A, Руководство пользователя, Страница: 38 / 62

35
Step 2: Press the Device Button within 20 secs, a “Learn Device success!” message will pop up to
indicate successful learning.
<NOTE>

Learning can only be completed within the signal reception range of the Panel. If no signal
is received within 20 sec, a “Learning Fail” message will pop up, and the Panel will
automatically return to Programming mode.

Adding a Device for a second time is prohibited unless it is removed from the system first.
95# Learn-In Sensor with Device ID
-
If sensor device ID is given (please refer to label sticking on the device or consult the supplier),
you can learn the device into the Panel using device ID
To learn in a device using device ID:
Step 1: Depending the device type, select the radio button of 93# (Silent Device) or the radio
button of 94# (Device) , and input the device ID number.
Step 2: Click “ Add .” An “Add Device 95 command success!” message will pop up to indicate
successful learning. If learning fails, the Panel will emit a long beep.