manualshive.com logo in svg

Cisco ONS 15454 SDH, Руководство по процедурам

Процедурный мануал для продукта Cisco ONS 15454 SDH доступен для скачивания бесплатно на manualshive.com. Руководство содержит все необходимые инструкции по установке и использованию данного устройства. Скачайте его сейчас и получите полное представление о функциональности продукта.

Поделиться
Скачать
background image

19-53

Cisco ONS 15454 SDH Procedure Guide, R7.0

78-17194-01

Chapter 19      DLPs D200 to D299

DLP- D249 Provision IP Settings

Step 2

Click the 

Provisioning

 > 

Network > General 

tabs.

Step 3

Complete the following information in the fields listed:

  •

IP Address—Type the IP address assigned to the ONS 15454 SDH node.

  •

Suppress CTC IP Display—Select this check box if you want to prevent the node IP address from 
being displayed in CTC to users with Provisioner, Maintenance, or Retrieve security levels. (The IP 
address suppression is not applied to users with Superuser security level.)

  •

LCD IP Display—Choose one of the following:

  –

Allow Configuration

—(Default) Displays the node IP on the front panel LCD and allows it to 

be changed using the ONS 15454 SDH LCD. This option enables the 

“DLP-D64 Set the IP 

Address, Default Router, and Network Mask Using the LCD” task on page 17-53

.

  –

Display Only

—Displays the node IP address on the front panel LCD but does not allow it to be 

changed.

  –

Suppress Display

—Suppresses the node IP address display on the front panel LCD.

  •

Default Router—If the ONS 15454 SDH is connected to a LAN, enter the IP address of the default 
router. The default router forwards packets to network devices that the ONS 15454 SDH cannot 
directly access. This field is ignored if any of the following are true:

  –

The ONS 15454 SDH is not connected to a LAN.

  –

SOCKS proxy server is enabled and the ONS 15454 SDH is provisioned as an end network 
element (ENE).

  –

Open Shortest Path First (OSPF) is enabled on both the ONS 15454 SDH and the LAN where 
the ONS 15454 SDH is connected.

  •

Forward DHCP Request To

—

Select this check box to enable DHCP. Also, enter the DHCP server IP 

address in the Request To field. The box is unchecked by default. If you will enable any of the 
gateway settings to implement the ONS 15454 SDH proxy server features, leave this field blank.

Note

If you enable DHCP, computers connected to an ONS 15454 SDH node can obtain 
temporary IP addresses from an external DHCP server. The ONS 15454 SDH only forwards 
DHCP requests; it does not act as a DHCP server.

  •

MAC Address—(Display only) Displays the ONS 15454 SDH IEEE 802 MAC address.

  •

Net/Subnet Mask Length—Type the subnet mask length (decimal number representing the subnet 
mask length in bits) or click the arrows to adjust the subnet mask length. The subnet mask length is 
the same for all ONS 15454 SDH nodes in the same subnet.

  •

TCC CORBA (IIOP) Listener Port—Sets the ONS 15454 SDH IIOP listener port used to 
communicate between the ONS  15454  SDH and CTC computers. This field is generally not changed 
unless the ONS 15454 SDH resides behind a firewall that requires a different port. See the 

“NTP-D27 Set Up the ONS 15454 SDH for Firewall Access” procedure on page 4-8

 for more 

information.

  •

Gateway Settings—Provisions ONS 15454 SDH SOCK proxy server features. Do not select any of 
these options until you review the SOCKS proxy server scenario in the “Management Network 
Connectivity” chapter in the 

Cisco ONS 15454 SDH Reference Manual

. In proxy server networks, 

the ONS 15454 SDH is either an ENE, a GNE, or a SOCKS proxy-only server. Provisioning must 
be consistent for each network element (NE) type.

Содержание ONS 15454 SDH





























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ONS 15454 SDH

Acconeer A111 User Manual preview
A111
Бренд: Acconeer Страницы: 32
Lochinvar Armor 101 Series Instructions Manual preview
Armor 101 Series
Бренд: Lochinvar Страницы: 28
Lochinvar Armor 101 Series Service Manual preview
Armor 101 Series
Бренд: Lochinvar Страницы: 44
Freescale Semiconductor FRDM-STBC-SA9500 Quick Reference Card preview
FRDM-STBC-SA9500
Бренд: Freescale Semiconductor Страницы: 2
National Instruments Fieldpoint cFP-RTD-124 Operating Instructions Manual preview
Fieldpoint cFP-RTD-124
Бренд: National Instruments Страницы: 15
Abocom WR5502 User Manual preview
WR5502
Бренд: Abocom Страницы: 63
ZyXEL Communications G-170S User Manual preview
G-170S
Бренд: ZyXEL Communications Страницы: 79
Commell FS-A79 User Manual preview
FS-A79
Бренд: Commell Страницы: 36
3Com 3C433279A Release Note preview
3C433279A
Бренд: 3Com Страницы: 12
Raven RFMOW V2 User Manual preview
RFMOW V2
Бренд: Raven Страницы: 33
Calix GS2020E GigaSPIRE BLAST Quick Start Manual preview
GS2020E GigaSPIRE BLAST
Бренд: Calix Страницы: 15
Perle IRG5540 Quick Start Manual preview
IRG5540
Бренд: Perle Страницы: 4
Carrier 40VMW005 Installation And Maintenance Instructions Manual preview
40VMW005
Бренд: Carrier Страницы: 18
Qvis 72-8P Series User Manual preview
72-8P Series
Бренд: Qvis Страницы: 233
RuggedCom RuggedSwitch RS500 Installation Manual preview
RuggedSwitch RS500
Бренд: RuggedCom Страницы: 16
ekwb EK-Quantum Vector TUF RX 6800 User Manual preview
EK-Quantum Vector TUF RX 6800
Бренд: ekwb Страницы: 14
ST STM32MP157 Series User Manual preview
STM32MP157 Series
Бренд: ST Страницы: 47
Trend Micro R610 Series Quick Start Manual preview
R610 Series
Бренд: Trend Micro Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды