manualshive.com logo in svg

Cisco ONS 15454 SDH, Руководство по процедурам

Процедурный мануал для продукта Cisco ONS 15454 SDH доступен для скачивания бесплатно на manualshive.com. Руководство содержит все необходимые инструкции по установке и использованию данного устройства. Скачайте его сейчас и получите полное представление о функциональности продукта.

Поделиться
Скачать
background image

6-83

Cisco ONS 15454 SDH Procedure Guide, R7.0

78-17194-01

Chapter 6      Create Circuits and Low-Order Tunnels

NTP- D144 Create an E-Series Single-Card EtherSwitch Manual Cross-Connect

Step 3

If a high number of VLANs is already used by the network, complete the 

“DLP-D99 Determine 

Available VLANs” task on page 17-98

 to verify that sufficient VLAN capacity is available. (You will 

create a VLAN during each circuit creation task.)

Step 4

In the node view, double-click the Ethernet card that will carry the cross-connect.

Step 5

Verify that the Ethernet card that will carry the circuit is provisioned for single-card EtherSwitch. See 
the 

“DLP-D246 Provision E-Series Ethernet Card Mode” task on page 19-50

.

Step 6

From the View menu, choose 

Go to Network View

.

Step 7

Click the 

Circuits

 tab and click 

Create

.

Step 8

In the Circuit Creation dialog box, complete the following fields: 

  •

Circuit Type—Choose 

VC_HO_PATH_CIRCUIT

.

  •

Number of Circuits—Leave the default unchanged (1). 

  •

Auto-ranged—Unavailable.

Step 9

Click 

Next

.

Step 10

Define the circuit attributes:

  •

Name—Assign a name to the cross-connect. The name can be alphanumeric and up to 48 characters 
(including spaces). Circuit names should be 44 characters or less if you want the ability to create 
monitor circuits. If you leave the field blank, CTC assigns a default name to the cross-connect.

  •

Size—Choose the cross-connect size. For single-card EtherSwitch, the available sizes are 

VC4

, 

VC4-2c

, and 

VC4-4c

.

  •

Bidirectional—Leave the default (checked) unchanged.

  •

Create cross-connects only (TL1-like)—Check this check box if you want to create one or more 
cross-connects to complete a signal path for TL1-generated circuits. If you check this box, low-order 
tunnels and Ethergroup sources and destinations are unavailable.

  •

State—Choose the administrative state to apply to all of the cross-connects in a circuit:

  –

Unlocked

—Puts the circuit cross-connects in the Unlocked-enabled service state.

  –

Locked,disabled

—Puts the circuit cross-connects in the Locked-enabled,disabled service state. 

Traffic is not passed on the circuit.

  –

Unlocked,automaticInService

—Puts the circuit cross-connects in the 

Unlocked-disabled,automaticInService service state and suppresses alarms and conditions. 
When the connections receive a valid signal, the service state automatically changes to 
Unlocked-enabled.

  –

Locked,maintenance

—Puts the circuit cross-connects in the Locked-enabled,maintenance 

service state. The maintenance state does not interrupt traffic flow; it suppresses alarms and 
conditions and allows loopbacks to be performed on the circuit. Use Locked,maintenance for 
circuit testing or to suppress circuit alarms temporarily. Change the administrative state to 
Unlocked; Unlocked,automaticInService; or Locked,disabled when testing is complete. See the 

“DLP-D230 Change a Circuit State” task on page 19-26

.

For additional information about circuit service states, refer to the “Circuits and Tunnels” chapter 
in the 

Cisco ONS 15454 SDH Reference Manual

.

  •

Apply to drop ports—Uncheck this box.

  •

Protected Drops—Leave the default unchanged (unchecked).

Step 11

If the circuit will be routed on an SNCP ring, complete the 

“DLP-D218 Provision SNCP Ring Selectors 

During Circuit Creation” task on page 19-17

.

Содержание ONS 15454 SDH





























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ONS 15454 SDH

Abus TVVR36500 User Manual preview
TVVR36500
Бренд: Abus Страницы: 60
Paradox ZX32D Manual preview
ZX32D
Бренд: Paradox Страницы: 4
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Бренд: Grasslin Страницы: 2
Conceptronic C150BRS4 Multi Language Quick Manual preview
C150BRS4
Бренд: Conceptronic Страницы: 2
Lorex LNR100 SERIES Instruction Manual preview
LNR100 SERIES
Бренд: Lorex Страницы: 186
Digitus DN-7057 Quick Installation Manual preview
DN-7057
Бренд: Digitus Страницы: 8
Qlogic QMC2462S Datasheet preview
QMC2462S
Бренд: Qlogic Страницы: 2
Fostex DE-1 Service Manual preview
DE-1
Бренд: Fostex Страницы: 20
EVS Neuron NFR2000 Installation And Service Manual preview
Neuron NFR2000
Бренд: EVS Страницы: 30
SIIG IO1037 Quick Installation Manual preview
IO1037
Бренд: SIIG Страницы: 6
Allnet ALL1682504 Quick Installation preview
ALL1682504
Бренд: Allnet Страницы: 12
Telebyte 458-LM-E2-36 Quick Start Manual preview
458-LM-E2-36
Бренд: Telebyte Страницы: 19
Magnadyne RV2458 Installation Manual preview
RV2458
Бренд: Magnadyne Страницы: 8
Marani LPP-440A User Manual preview
LPP-440A
Бренд: Marani Страницы: 39
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Бренд: ivideon Страницы: 11
Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual preview
IE-SW-PL09M-5GC-4GT
Бренд: Weidmuller Страницы: 15
Gundermann VIDEOWALL LEDWALL Optimizer HQ P2 Manual preview
LEDWALL Optimizer HQ P2
Бренд: Gundermann VIDEOWALL Страницы: 12
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Бренд: Tripp Lite Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды