manualshive.com logo in svg

Cisco ONS 15454 SDH, Руководство по процедурам

Процедурный мануал для продукта Cisco ONS 15454 SDH доступен для скачивания бесплатно на manualshive.com. Руководство содержит все необходимые инструкции по установке и использованию данного устройства. Скачайте его сейчас и получите полное представление о функциональности продукта.

Поделиться
Скачать
background image

5-5

Cisco ONS 15454 SDH Procedure Guide, R7.0

78-17194-01

Chapter 5      Turn Up a Network

NTP- D339 Point-to-Point Network Acceptance Test

b.

Verify that no unexplained alarms appear on the network. If unexplained alarms appear, resolve 
them before continuing. Refer to the 

Cisco ONS 15454 SDH Troubleshooting Guide

 if necessary. 

c.

Complete the 

“DLP-D147 Export CTC Data” task on page 18-38

 to export the alarm information.

Step 4

Click the 

Conditions

 tab. 

a.

Verify that no unexplained conditions appear on the network. If unexplained conditions appear, 
resolve them before continuing. Refer to the 

Cisco ONS 15454 SDH Troubleshooting Guide

 if 

necessary. 

b.

Complete the 

“DLP-D147 Export CTC Data” task on page 18-38

 to export the conditional 

information.

Step 5

On the network map, double-click one point-to-point node to open it in node view.

Step 6

Create a test circuit from the login node to the other point-to-point node:

  •

For VC4 circuits, complete the 

“NTP-D323 Create an Automatically Routed High-Order Circuit” 

procedure on page 6-55

. When you set the circuit state, choose 

Unlocked

 and check the 

Apply to drop ports

 check box.

  •

For VC3 circuits, complete the 

“NTP-D54 Create an Automatically Routed Low-Order VC3 

Circuit” procedure on page 6-31

. When you set the circuit state, choose 

Unlocked

 and check the 

Apply to drop ports

 check box.

  •

For VC12 circuits, complete the 

“NTP-D81 Create an Automatically Routed Low-Order VC12 

Circuit” procedure on page 6-19

. When you set the circuit state, choose 

Unlocked

 and check the 

Apply to drop ports

 check box.

  •

For VC11 circuits, complete the 

“NTP-D334 Create an Automatically Routed Low-Order VC11 

Circuit” procedure on page 6-7

. When you set the circuit state, choose 

Unlocked

 and check the 

Apply to drop ports

 check box.

Step 7

Configure the test set for the test circuit type you created: 

  •

VC4 or VC4-nc—If you are testing a VC4 circuit or a VC4-nc circuit on an STM-N card, you must 
have a direct optical interface to the ONS 15454 SDH. Set the test set for STM-N. For information 
about configuring your test set, consult your test set user guide.

  •

VC3—If you are testing a clear channel E3/DS3I, you must have a patch panel or a direct E3/DS3I 
interface to the ONS 15454 SDH. Set the test set for clear channel E3/DS3I. For information about 
configuring your test set, consult your test set user guide.

  •

VC12—If you are testing an E1, you must have a patch panel or a direct E1 interface to the 
ONS 15454 SDH. Set the test set for E1. For information about configuring your test set, consult 
your test set user guide.

  •

VC11—If you are testing a VC11 circuit on an STM-N or MRC-12 card, you must have a direct 
optical interface to the ONS 15454 SDH. Set the test set for STM-N. For information about 
configuring your test set, consult your test set user guide.

Step 8

Verify the integrity of all patch cables that will be used in this test by connecting one end to the test set 
transmit (Tx) connector and the other end to the test set receive (Rx) connector. If the test set does not 
run error-free, check the cable for damage and check the test set to make sure it is set up correctly before 
going to the next step.

Step 9

Create a physical loopback at the circuit destination card. To do so, attach one end of a patch cable to 
the destination port’s transmit (Tx) connector; attach the other end to the port’s receive (Rx) connector. 

Step 10

At the circuit source card:

a.

Connect the transmit (Tx) connector of the test set to the receive (Rx) connector on the circuit source 
card. 

Содержание ONS 15454 SDH





























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ONS 15454 SDH

IBM LS42 - BladeCenter - 7902 Installation Manual preview
LS42 - BladeCenter - 7902
Бренд: IBM Страницы: 56
IBM ATA 133 Quick Hardware Setup Manual preview
ATA 133
Бренд: IBM Страницы: 2
IBM BladeCenter Management Module User Manual preview
BladeCenter Management Module
Бренд: IBM Страницы: 78
IBM 9040-MR9 Manual preview
9040-MR9
Бренд: IBM Страницы: 110
IBM Remote Supervisor Adapter II User Manual preview
Remote Supervisor Adapter II
Бренд: IBM Страницы: 132
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Бренд: FOR-A Страницы: 72
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Бренд: NXP Semiconductors Страницы: 26
Konig CMP-HOMEPL1000 Manual preview
CMP-HOMEPL1000
Бренд: Konig Страницы: 73
FOR-A USF-105AS Operation Manual preview
USF-105AS
Бренд: FOR-A Страницы: 39
NETGEAR AC1450 Installation Manual preview
AC1450
Бренд: NETGEAR Страницы: 14
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Бренд: Moxa Technologies Страницы: 10
Zonet ZUN2200 Quick Installation Manual preview
ZUN2200
Бренд: Zonet Страницы: 2
Avaya PARTNER PC CARD Installation Instructions preview
PARTNER PC CARD
Бренд: Avaya Страницы: 4
Renesas H8/3864 Series User Manual preview
H8/3864 Series
Бренд: Renesas Страницы: 20
Digi ConnectCore 8X Hardware Reference Manual preview
ConnectCore 8X
Бренд: Digi Страницы: 116
AOpen ISDN SOHO Router User Manual preview
ISDN SOHO Router
Бренд: AOpen Страницы: 89
NBase NH 210 Installation And User Manual preview
NH 210
Бренд: NBase Страницы: 18
Gearlinx NR4400 Series User'S Quick Start Manual preview
NR4400 Series
Бренд: Gearlinx Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды