Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 94 / 406

4-22
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 4 Troubleshooting the CTS 500
Managing CTS 500 Hardware Setup
Testing Speakers
The speakers are set up successfully when sound can be heard clearly from each one. When running a
test, you can choose whether to cycle through the speakers automatically or manually.
Use the information in the following sections to test the speakers for your system:
• Testing the Speakers, page 4-22
•
Troubleshooting Speakers, page 4-23
• Related Information, page 4-23
Testing the Speakers
To test the speakers:
Step 1 Log in to the Cisco TelePresence System Administration interface.
Step 2
Choose Troubleshooting > Hardware Setup
Step 3
Click the Speakers radio button.
Step 4 Click Start to begin the speaker test. The speaker test screen appears, as shown in Figure 4-14
Figure 4-14 Speaker Test Screen
Step 5
Click Cycle Through Speakers to have sound cycled automatically for 5 seconds on each speaker.
Step 6 Click Manually Step Through Speakers to test sound on each speaker. The Next Speaker button is
activated.
Step 7
Click Next Speaker to progress to the next speaker.