Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 180 / 406

7-10
Cisco TelePresence System Administrator Guide
OL-21845-01
Chapter 7 Troubleshooting the CTS 1100
Managing CTS 1100 Hardware Setup
Note The table must be 28 to 32 inches (71 to 81 cm) high; 30 inches (76 cm) is the optimal height.
Figure 7-6 Table Positioning
Managing Focus Adjustments and Adjusting the Camera Zoom
To adjust the zoom and perform initial focus adjustment for the camera, complete the steps in the
following procedure.
Step 1
Place the large camera target with the easel in the position where the two participants will sit, with the
front legs of the easel touching the edge of the table.
Step 2 Measure the distance between the corners of the easel and the corners of the display to make sure that
the target is parallel to the display, as shown in
Figure 7-7 .
Figure 7-7 Measuring the Distance between the Easel and Display
A B
A=B
44 inches
(112 cm)
minimum
8 feet (244 cm) recommended,
12 feet (366 cm) maximum)
206615
30 inches (76 cm)
between participants
18 inches
(46 cm)
Display
Same distance
Center participant
sitting position
camera target
20666