Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 227 / 406

8-15
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 8 Troubleshooting the CTS 1300
Managing CTS 1300 Hardware Setup
Figure 8-10 Long Racetrack Table Positioning
Step 3 Make sure that the camera assembly is level by completing the steps in the “Removing the Camera Cover
and Leveling the Cameras” section on page 8-8 .
Step 4 Build the easel, and attach the large camera target to the easel, by completing the steps in the “Attaching
the Large Camera Target to the Easel” section on page 8-11 , making sure that the bottom of the target is
32 inches above the ground.
Step 5
Log in to the Cisco TelePresence System Administration interface.
Step 6
Select the table type by completing the following steps:
a. Choose Troubleshooting > Hardware Setup.
b. Click the Configuration radio button. The table configuration window appears, as shown in
Figure 8-2 .
c. Click the Start button to start testing.
d. Select the type of table you have from the drop-down menu:
– Long Straight Table ( Figure 8-11 )
–
Long Racetrack Table ( Figure 8-12 )
–
Short Straight Table ( Figure 8-13 )
10 feet
A B
30 inches
44 inches
minimum
6 feet minimum,
12 feet maximum,
8 feet recommended
206156
A=B