Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 67 / 406

3-23
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
Troubleshooting Your Configuration
CTS does not auto answer • An incoming conference call is ringing
and the CTS does not auto answer
immediately.
• The call is connected but there is no
video
The CTS rings and auto-answers a call based
on how these features were configured in
Cisco Unified CM.
If the call is connected as audio only, check
your IP phone configuration and make sure the
“Disable Speaker/Headset” box is checked.
To disable the IP phone speaker/headset:
1.
Logon to the CUCM
2.
Search for your directory number ( DN ).
Two devices are displayed: CTS and
Cisco Unified IP Phone.
3. Click on the IP_Phone device.
4. Scroll down to the Product Specific
Configuration Layout window.
5. Verify that the following check-boxes are
checked in the Product Specific
Configuration Layout window:
– Disable Speakerphone
–
Disable Speakerphone and Headset
6.
Apply and Save the configuration.
7. Reset the device.
See the Cisco Unified Communications
Manager Configuration Guide for
Cisco TelePresence System
for more
information.
Call terminates prematurely DSP failure due to incompatible CTS
software version. CTS devices are backward compatible up to
two CTS Software Releases. You may want to
upgrade your software.
•
Conference room is
deleted from future
meeting schedule in
CTS Manager.
•
Lost ability to invite
expected conference
room into a call.
• Studio Mode recording
is not working.
• SD InterOp feature is not
working.
• HD InterOp feature is
not working.
The Cisco TelePresence Recording Server
(CTRS) Studio Mode recording feature is not
working and the room has been
unsubscribed.
One or more of the rooms in a conference
does not support the feature.
Check Room View on CTS-Man to verify
whether a CTS device is capable of supporting
the features in a specific room. Then check
your Cisco Unified CM configuration settings
to configure the device.
See the Cisco Unified Communications
Manager Configuration Guide for the
Cisco TelePresence System
for more
information.
Table 3-6 Troubleshooting the Cisco TelePresence Configuration
Problem Possible Cause Possible Solutions