Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 57 / 406

3-13
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
Cisco Unified Communications Manager Settings
Figure 3-8 Cisco Unified Communications Manager Settings
Step 2 Configure Cisco Unified CM settings using the information in Table 3-2 .
Note The Apply and Reset buttons become active when a value is entered in this field.
Step 3
Click Apply to register new or modified settings.
Step 4 Click Reset to restore the original settings.
Table 3-2 Cisco Unified Communications Manager Settings
Field Settings
Use Configuration TFTP Server • Click Automatic to set the default condition, which is that the
TFTP server will reply to DHCP requests for option 150, or for
a list of TFTP servers that indicate to endpoints in the network
where to find Cisco Unified CM configuration files.
• Click Specify to manually supply IP addresses of TFTP servers
in the interactive fields provided.
TFTP Server 1 through 5 Click Specify at Use Configuration TFTP Server to activate
interactive fields that are provided for entering TFTP server IP
addresses.
Cisco Unified Communications
Manager 1 through 5 Display-only report that shows the names of up to five
Cisco Unified Communications Managers.
CAPF Authentication String Enter the Certificate Authority Proxy Function authentication
string. The characters entered in this field must match the CAPF
Authentication string entered in Cisco Unified CM.
Certificate Trust List (CTL) The Delete CTL button becomes active when the CTS is provided
with a CTL by a Cisco Unified CM configured in mixed
authentication mode.
Click Delete CTL to delete all entries on the CTL.