Cisco CTS 1000 - TelePresence System 1000 Video Conferencing, Руководство администратора

Страница: 58 / 406

3-14
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
Address Book
Note All codecs on the system must be connected and enabled for the factory reset to complete. To register a
device, see the “Optional Hardware” and “Troubleshooting the Cisco TelePresence Configuration”
sections of the
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence
System .
Related Information
See the following documentation for more information about Cisco Unified CM:
•
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
• Cisco Unified Communications Manager (CallManager) Documentation Roadmaps
Address Book
The Address Book window displays read-only entries that have been set during Cisco Unified
Communications Manager (Cisco Unified CM) configuration. You can create listings for up to 40
meeting rooms.
To view the phone list of Cisco TelePresence system-enabled meeting rooms:
Step 1
Choose Configuration > Address Book. The Address Book window appears, as shown in Figure 3-9 .
Figure 3-9 CTS Address Book
Step 2 Use Cisco Unified CM to make changes to the Address Book. See the Cisco Unified Communications
Manager Configuration Guide for the Cisco TelePresence System .