Canon MultiPASS L60 Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 341

Canon MultiPASS L60 Скачать руководство пользователя страница 91

Chapter 4

Paper Handling

4-5

Paper Handling

Labels

Sheets of A4 or letter-size self-sticking labels should also print without
any problems. Labels must meet the requirements listed for plain paper,
as well as the following:

❏

Labels must have an ordinary, matte finish similar to copy paper.

❏

The label backing must not be made of easily removable coated
paper.

❏

Labels must not have any exposed adhesive.

❏

Do not use labels that are separating from the backing sheet or that
are wrinkled or damaged in any way.

❏

Do not use label sheets with the backing sheet exposed, such as
labels with any spaces between them.

N

When feeding labels, be sure to use face-up delivery. See page 4-9 for
details.

Transparencies

You must use special laser printer transparencies for printing. A4 and
letter-size laser transparencies should print without any problems.

❏

To prevent the transparency from curling, remove the transparency
as it comes out of the MultiPASS L60 and set it on a flat surface to
cool.

N

When feeding transparencies, be sure to use face-up delivery. See page
4-9 for details.

«
...
89
90
91
92
93
...
»

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов