manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 160 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 160

6-32

Sending Faxes

Chapter 6

❏

Coded speed dialling:

Press

CODED DIAL

, then enter the two-digit code (00–99)

using the numeric buttons.

• Be sure to press 

CODED DIAL 

before each code.

❏

Regular dialling:

Enter the number using the numeric buttons, then press

START/COPY

.

• You can only enter one number with the numeric buttons.

N

❏

After entering the first one-touch speed dialling button or coded
speed dialling code, you have five seconds to enter another speed
dialling button or code before the MultiPASS L60 begins sending
automatically. If you have entered more than one speed dialling
button or code, the MultiPASS L60 waits for 10 seconds before it
begins sending. If you do not want the MultiPASS L60 to send
automatically, you need to change the AUTO START TX setting. See
pages 13-8 and 13-9 for more details.

❏

If you want to review the numbers you entered, press the

FUNCTION

button and use the 

<

<

or 

>

>

button to scroll through the

numbers.

3.

When you finish entering numbers, press 

START/COPY

to begin

sending, or wait a few seconds for the MultiPASS L60 to begin
sending automatically.

❑

The MultiPASS L60 then scans the document into memory, and
begins sending it to the destinations in numerical order, starting
with the coded dial numbers, then the one-touch numbers, and
finally the number dialled with the numeric buttons.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов