manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 242 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 242

11-18

Frequently Asked Questions

Chapter 11

Problems Feeding Paper into the MultiPASS L60

If you are having problems feeding paper into the MultiPASS L60,
check the following table.

N

Whenever you correct one of these problems, be sure to remove the
paper from the multi-purpose tray and reload it. See page 2-35.

The following problems can also cause the paper to jam in the unit. See
page 11-5 for instructions on clearing paper jams.

Problem

Possible cause

Solution

Paper does not feed

The multi-purpose tray 

Make sure the multi-

through the multi-

may contain too many

purpose tray is not filled 

purpose tray?

sheets.

past the limit. See page 2-35.

Paper may not be inserted

Make sure paper is inserted

correctly in the multi-

all the way into the multi- 

purpose tray.

purpose tray. See page 2-35.

A sheet is set in the manual

When a sheet is set in the

feed slot.

manual feed slot, the
MultiPASS L60
automatically feeds the
sheet set in this slot. Make
sure there is no sheet in the
manual feed slot.

Paper does not feed

Certain types of paper may

Try feeding the paper

through the manual

not feed properly through 

through the multi-purpose

feed slot?

the manual feed slot.

tray. To do this, temporarily
remove any paper from the
multi-purpose tray and feed
through it the paper you are
having difficulty with.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов