manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 226 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 226

11-2

Frequently Asked Questions

Chapter 11

If You Cannot Solve the Problem

If you have a problem with your MultiPASS L60 and cannot solve it
using the information in this chapter, contact your local authorised
Canon dealer or the Canon help line.

C

If the MultiPASS L60 makes strange noises, emits smoke or strange
smells, unplug it immediately and contact your local authorised Canon
dealer or the Canon help line. Do not attempt to disassemble or repair
the unit yourself.

N

Attempting to repair the MultiPASS L60 yourself may void the limited
warranty.

Before contacting your local authorised Canon dealer or the Canon help
line, make sure you have the following information about your
MultiPASS L60:

❏

The unit’s name: MultiPASS L60

❏

The MultiPASS L60 serial number (on a label on the back of the 
MultiPASS L60)

❏

Where you purchased the unit

❏

A detailed description of the problem

❏

The steps you have taken to solve the problem, and the results

MADE IN X X X X X

CANON INC.

NO.  X X X X X X X X 

SERIAL NUMBER

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов