manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 29 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 29

Introducing the

MultiPASS L60

Chapter 1

Introducing the MultiPASS L60

1-15

Safety Instructions

Read these safety instructions thoroughly before using your MultiPASS
L60, and keep them handy in case you need to refer to them later.

C

Except as specifically described in this user’s guide, do not attempt to
service the MultiPASS L60 yourself. Never attempt to disassemble the
unit: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact your local
authorised Canon dealer or the Canon help line.

❏

Always follow all warnings and instructions marked on the 
MultiPASS L60.

❏

Use the MultiPASS L60 only on a sturdy, stable, level surface. If the
unit falls, it could be seriously damaged.

❏

Do not use the MultiPASS L60 near water. If you spill liquid on or
into the unit, unplug it immediately and call your local authorised
Canon dealer or the Canon help line.

❏

The back of the MultiPASS L60 includes slots and openings for
ventilation. To keep the MultiPASS L60 from overheating (which
can cause it to operate abnormally and create a fire risk), take care
not to block or cover these openings. Do not operate the unit on a
bed, sofa, rug, or other similar soft surface, or near a radiator or
other heat source. Do not place the MultiPASS L60 in a cupboard or
cabinet or on shelves unless adequate ventilation is available. See
“Choosing a Location for Your MultiPASS L60” on page 2-3 for
guidelines on how much space the unit needs for ventilation.

❏

Operate the MultiPASS L60 only from the type of power source
indicated on the unit’s label. If you are unsure of the type of power
available from your wall outlets, contact your local power company.

❏

Make sure the total amperage used by all devices plugged into the wall
outlet does not exceed the ampere rating of the outlet’s circuit breaker.

❏

Do not allow anything to rest on the power cord or place the 
MultiPASS L60 where the cord will be walked on. Make sure the
cord is not knotted or kinked.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов