manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 7 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 7

Preface

vii

Safety Information

Laser Safety

Laser radiation could be hazardous to the human body. For this reason,
laser radiation emitted inside this fax is hermetically sealed within the
protective housing and external cover. In the normal operation of the
product by the user, no radiation can leak from the machine.
This fax is classified as Class 1 laser product under IEC 825, and as for
the USA, is classified as Class 1 under the Code of Federal Regulation, 
§ 1040.10 of Title 21.

C

Use of controls, adjustments, or performance of procedures other than
those specified in this user’s guide may result in hazardous radiation
exposure.

This label is attached to the laser scanner unit inside the MultiPASS L60
and is not in a user access area.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов