manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 258 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 258

11-34

Frequently Asked Questions

Chapter 11

General Problems

Problem

Cause

Solution

The MultiPASS L60 

The power cord may not be 

Make sure the power cord

has no power?

securely plugged into the 

is plugged securely into the 

unit.

unit and into a wall outlet.

If the power cord is
connected to a power strip,
make sure the strip is
connected to an outlet and
turned on.

The power cord may not 

Check the power cord by

be supplying power.

substituting another, or by 
using a voltameter to test it 
for continuity.

Nothing appears in the 

The MultiPASS L60 may 

Check the plug and be sure 

LCD display?

not be receiving power. 

it is firmly plugged into the 
power connector and the
wall outlet.

If the display remains
blank, unplug the 
MultiPASS L60, wait five
seconds, then plug it in
again. If the display still
remains blank, call your
local authorised Canon
dealer or the Canon help
line.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов