Canon MultiPASS L60, Руководство пользователя, Страница: 283 / 341

Chapter 13 The Menu System
13-9
The
Menu System
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TX ERROR
RESEND
RESEND TX
FROM
ERASE FAILED TX
AUTO START TX
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling
sequence.
Set whether the MultiPASS L60 redials if it fails to get a
response on the first attempt.
Set the number of retries.
Set the period of time between rediallings.
Set whether the fax redials if an error occurs while sending.
Set which pages to resend if TX ERROR RESEND is on.
Set whether the fax in memory is erased if an error occurs
during sending but then it is resent successfully.
ON: Scanning starts 10 seconds after the last number is
entered when sending to multiple destinations (5 seconds if
only sending to one destination.)
OFF: After entering the last number, press the START/-
COPY button, or else the MultiPASS L60 will return to
standby mode after 60 seconds.
ON/OFF
2 seconds (1 to 15)*
ON/OFF
2 times (1 to 15)**
2 minutes (2 to 99)***
ON/OFF
ERROR & 1ST PG/
ERROR PAGE/
ALL PAGES
ON/OFF****
ON/OFF
TX SETTINGS
Name Description Settings
(Default settings are shown in bold type)
* UK and Hong Kong: 4 seconds (04–11)
** UK and Hong Kong: 01–03, Australia: 01–02, Ireland: 01–04, New Zealand: 01–05
*** Australia, Hong Kong, Malaysia: 01–99, New Zealand: 1 minute (01–99)
**** The default setting for Australia, New Zealand, Hong Kong, Malaysia, Ireland, and Singapore is OFF.