manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 30 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 30

1-16

Introducing the MultiPASS L60

Chapter 1

❏

Do not insert objects of any kind into the slots or openings on the
MultiPASS L60’s cabinet, as they could touch dangerous voltage
points or short out parts, and result in fire or electric shock. 

❏

Do not allow small objects (such as pins, paper clips, or staples) to
fall into the MultiPASS L60. If something does fall into it, unplug the
unit immediately and call your local authorised Canon dealer or the
Canon help line.

❏

Do not plug the power cord into an uninterruptible power supply
(UPS).

❏

Always unplug the MultiPASS L60 before moving or cleaning it.

❏

Whenever you unplug the MultiPASS L60, wait at least five seconds
before you plug it back in.

❏

Keep the MultiPASS L60 away from direct sunlight, as this can
damage it. If you have to place it near a window, install heavy
curtains or blinds.

❏

Do not expose the MultiPASS L60 to extreme temperature
fluctuations. Install the unit in a place with temperatures between
10° and 32.5°C.

❏

Always unplug the MultiPASS L60 during thunderstorms.

❏

Before you transport the MultiPASS L60, remove the toner cartridge.

❏

Always lift the MultiPASS L60 as shown below. Never lift it by its
multi-purpose tray or other supports.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов