manualshive.com logo in svg

Canon MultiPASS L60, Руководство пользователя, Страница: 164 / 341

Поделиться
Скачать
Canon MultiPASS L60 Скачать руководство пользователя страница 164

6-36

Sending Faxes

Chapter 6

N

❏

If the MultiPASS L60 memory becomes full while scanning your
document, MEMORY FULL appears in the LCD display. If this
happens, you cannot send the document at a delayed time. See page
6-24 to remove your document from the Automatic Document
Feeder (ADF).

❏

You can only register one preset sending operation at a time.

When the set time comes, the MultiPASS L60 dials and sends the
document.

Sending Other Documents While the MultiPASS L60 is
Set for Delayed Sending

The MultiPASS L60 is a multitasking unit, so you can send, receive,
print, and copy other documents even when you have set the MultiPASS
L60 for delayed sending.

To print, copy, or send other documents after setting the MultiPASS L60
for delayed sending, simply follow the procedures described in this
user’s guide.

Содержание MultiPASS L60






















































































































































































































































































































































Отзывы:

Нет отзывов