Canon iR C2880 series, Руководство по обслуживанию

Страница: 558 / 610

Chapter 17
17-74
5. INT-FACE
T-17-59
6. LCNS-TR
T-17-60
COPIER>OPTION>INT-FACE
Sub item Description level.
IMG-CONT Used to set connection to PS print server unit.
Setting values
0: Normal mode (no PS print server unit) [Factory default]
1: Not used
2: Not used
3: PS print server unit
4: Not used
5: Not used
Attention:
When 1 is selected as the setting value, the following user mode items are restored to their initial values:
- System management settings > Network settings > TCP/IP settings > IP
address settings > IP address
- System management settings > Network settings > TCP/IP settings > IP
address settings > Sub-net mask
- System management settings > Network settings > TCP/IP settings > IP
address settings > Gateway address
- System management settings > Network settings > Ethernet driver settings
> Communication method
- System management settings > Network settings > Ethernet driver settings
> Ethernet type
- System management settings > Network settings > Startup time
- Common specifications settings
The following user mode settings are turned OFF:
- System management settings > Network settings > TCP/IP settings > IP address setting > DHCP use
- System management settings > Network settings > TCP/IP settings > IP
address settings > RARP use
- System management settings > Network settings > TCP/IP settings > IP
address settings > BOOTP use
- System management settings > Network settings > Ethernet driver settings
> Automatic detection
- System management settings > Network settings > Spool function use
When 3 or 4 is selected as the setting value, the following settings are
turned OFF in addition to the items above.
- System management settings > Network settings > TCP/IP settings >
RAW setting
- System management settings > Network settings > TCP/IP settings > LPD
setting
- System management settings > Network settings > TCP/IP settings > IPP
printing
- System management settings > Network settings > SMB setting
The items above are not restored when the setting value is returned to "0:
Normal mode", so must be set again as needed.
1
AP-OPT Used to set whether printing from application PrintMe in PS print server unit is possible.
0: Printing permitted for all department IDs [Factory default/After RAM clear]
1: Printing refused (printing is only possible for specified department ID).
2
AP-ACCNT Used to set (CPCA) department ID for printing (print jobs) from application PrintMe in PS print server unit.
0 to 9999999 [Factory default/After RAM clear: 0]
2
AP-CODE Use it to set a path for printing from an external controller (CPCA).
Setting: 0 [Factory default/After RAM clear]
Setting range: 0 to 9999
2
NWCT-TM Sets the time limit for maintaining the network connection ('KeepAlive' setting).
Sets the length of time that the PC application and the iR device can be kept connected (KeepAlive) via the network.
Main PC applications (envisaged): network printing application, email function, remote copy printer function, MEAP
network applications, etc.
Setting range: 1 to 5 (min.)
[Factory settings and after RAM clear: 5]
2
COPIER>OPTION>LCNS-TR
Sub item Description level.
ST-SEND Use it to select whether to display the installation status of the SEND function when the transfer function is set invalid.
Setting value
0: SEND function not available (not installed)
1: SEND function available (installed)
[Factory default/After RAM clear]
2
TR-SEND Use it to obtain the transfer license key for the SEND function when the transfer function is set invalid.
Obtains the transfer license key to use the SEND function in other MFP machine.
2
OF-SEND Use it to select whether to use the SEND function when the transfer function is set invalid.
Setting value
0: Do not use SEND function.
1: Use SEND function.
[Factory default/After RAM clear]
2
ST-ENPDF Use it to display the installation status of the SEND encryption PDF transmission function when the transfer function is
set invalid.
Setting value
0: SEND encryption PDF transmission function not available (not installed)
1: SEND encryption PDF transmission function available (installed)
[Factory default/After RAM clear: 0]
2