Canon iR C2880 series, Руководство по обслуживанию

Страница: 350 / 610

Chapter 10
10-24
F-10-82
4) Remove the HVT1 PCB [1].
- 2 screws [2]
F-10-83
10.5.13 HV2 PCB
10.5.13.1 Before Removing the HVT2 PCB (for transfer)
0014-2482
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the processing unit. (page 7-40) [Removing the Process Unit]
10.5.13.2 Removing the HVT2 PCB (for transfer)
0014-2483
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Press the push-button [1], and hold the grip [2] to open the ITB unit [3]
upward.
F-10-84
2) Secure the ITB unit [1] in place with the tip-resistant arm [2] (Secure in
the lower slot of the 2)
Do not touch the ITB. If the ITB is scratched, it may cause the pickup fault
or degradation of the print quality.
In case the print quality is degraded due to touching the ITB, clean the ITB
with soft and dry cloth.
If the print quality is not improved, execute the following:
[Additional Functions] > [Adjustment/Cleaning] > [Cleaning inside Main
Unit] > [Start]
F-10-85
3) Remove the screws [1].
F-10-86
4) Detach the upper ITB cover [1].
- 4 screws [2]
F-10-87
5) Detach the high-voltage contact cover [2].
- 3 claws [1]
[1]
[2]
[1]
[2]
[1] [2] [3]
[1]
[2]
[1] [2]
[1]
[2] [2]