Canon iR C2880 series, Руководство по обслуживанию

Страница: 475 / 610

Chapter 16
16-13
- if XX='01 to FF'
XX YY
HDD formatting
XX
CHK-
TYPE Partition in
question
Description
YY=03 YY=05
YY=00,
01,02,04
YY=11,
21
YY=13,
25
YY=10,
12,14,22
,23,24
At time of start-up During normal operation
Remedy Remedy Remedy Remedy Remedy Remedy
Items
deleted
(typical)
HDD
formatting
by HD-
CLEAR
HDD
formatting
by normal
mode +
SST
HDD
formatting
by safe
mode +
SST
01
1
FSTDEV
image data storage
area (e.g., Box)
*1 *5 *9 *10 *11 *12
all stored
data (e.g.,
Box)
possible (3
partitions
simultaneo
us)
FSTDEV
selected (3
partitions
simultaneo
us)
02 IMG_MNG
image management
data
*1 *5 *9 *10 *11 *12
03 FSTCDEV
image data storage
area (for Chasing)
*1 *5 *9 *10 *11 *12
04
2
APL_GEN
general-purpose data
storage area
*1 *5 *9 *10 *11 *12 General
possible (4
partitions
simultaneo
us)
APL_GEN
selected (4
partitions
simultaneo
us)
05 TMP_GEN
general-purpose data
storage area
(temporary file)
*1 *5 *9 *10 *11 *12 General
06 TMP_FAX fax (temporary file) *1 *5 *9 *10 *11 *12 FAX
07 TMP_PSS PSS (temporary file) *1 *5 *9 *10 *11 *12 PSS
08
3 PDLDEV
PDL-related file
storage area (font,
registration form,
ICCProfile, PDL
function color
correction information
file)
*1 *5 *9 *10 *11 *12
UserFont
Icc
Profile
possible
PDLDEV
selected
09
4 BOOTDEV
Firmware storage area
(Booktable, MEAP,
Key, certificate, PDF
dictionary, RUI
content, voice
dictionary (ICC
profile, PS test data))
*3 *8 *9 *10 *11 *12 System
Not
possible
Not
possible
10 5 APL_MEAP MEAP *1 *5 *9 *10 *11 *12 MEAP possible possible
11
6
APL_SEND address book, filter *2 *5 *9 *10 *11 *12 SEND
Not
possible
Not
possible
FF
0
Not identified
HDD full sector fault
check and repair
*4 *7 *9 *10 *11 *12 - - - -
YY Description Remedial action
*1 03 WriteAbort(start-up) 1. Indicate the partition in question for CHK-TYPE; then, execute HDD-CHECK (several min to several 10s
of min); then, turn off and then on the power.
2. If the foregoing fails, indicate the partition for CHK-TYPE, and execute HDD-CLEAR; then, turn off and
then on the main power switch.
*2 03 WriteAbort(start-up) 1. If possible, ask the user to make a backup of the data (address book) using the remote UI.
2. Indicate the partition in question for CHK-TYPE, and execute HDD_CHECK (several min to several 10s
of min); then, turn off and then on the main power switch.
3. If the foregoing fails, start download mode, and execute full formatting and reinstall the system software
(System, Lang, RUI); then, turn off and then on the main power switch.
*3 03 WriteAbort(start-up) Recovery on the boot partition always calls for the use of SST in safe mode:
1. Set CHK-TYPE=0, and execute HDD-CHECK (several 10s of min); then, turn off and then on the power.
2. If the foregoing fails, start download mode, and execute full formatting and reinstall the system software
(System, Lang, RUI); then, turn off and then on the main power switch.
*4 03 WriteAbort(start-up) 1. Set CHK-TYPE=0, and execute HDD-CHECK (several 10s of min); then, turn off and then on the power.
2. If the foregoing fails, use CHK-TYPE-1, 2, 3, 5 to execute HDD-CLEAR; then, turn off and then on the
power.
*5 05 file system error 1. Indicate the partition for CHK-TYPE, and execute HDD-CLEAR; then, turn off and then on the main
switch.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*6 05 file system error HDD-CLEAR cannot be executed in service mode so as to prevent inadvertent deletion of data for address
book, filter, and the like.
1. If possible, ask the user to make a backup of the data for address book using the remote UI.
2. Start in service mode, and start download mode. Execute full formatting using the SST, and reinstall the
system software (System, Lang, RUI); then, turn off and then on the main power switch.
*7 05 file system error This error seldom occurs.
1. Using CHK-TYPE=1, 2, 3, 5, execute HDD-CLEAR; then, turn off and then on the power.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*8 05 file system error Repair of the boot partition always calls for the use of the SST in safe mode.
1. Start up in safe mode, and execute full formatting using the SST and reinstall the system software (System,
Lang, RUI); then, turn off and then on the main power switch.
2. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.
*9 00,01,
02,04 HDD contact fault, or v x Works
system error 1. Check the cable and power supply connectors.
2. If the foregoing fails, start up in safe mode, and execute full formatting using the SST and reinstall the
system software; then, turn off and then on the main power switch.
3. If the foregoing fails, suspect a fault on the HDD, and replace the HDD and reinstall the system software.