Canon iR C2880 series, Руководство по обслуживанию

Страница: 516 / 610

Chapter 17
17-32
2TR-N2 Adjust the offset for paper voltage of the secondary transfer bias on the second side of plain paper (at a constant speed
at 600dpi).
Offset value for the paper voltage of the secondary transfer bias, Second side of plain paper, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-NH1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of plain paper (at a half speed at
1200dpi).
Offset value for the paper voltage of the secondary transfer bias, First side of plain paper (1200dpi), Environmental
category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-NH2 Adjust the offset for paper voltage of the secondary transfer bias on the second side of plain paper (at a half speed at
1200dpi).
Offset value for the paper voltage of the secondary transfer bias, Second side of plain paper (1200dpi), Environmental
category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-P1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of a postcard.
Offset value for the paper voltage of the secondary transfer bias, First side of a postcard, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-P2 Adjust the offset for paper voltage of the secondary transfer bias on the second side of a postcard.
Offset value for the paper voltage of the secondary transfer bias, Second side of a postcard, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-L1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of label paper.
Offset value for the paper voltage of the secondary transfer bias, Label paper, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-SP1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of special paper (Special Paper 1, 2).
Offset value for the paper voltage of the secondary transfer bias, Special paper, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-H1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of thick paper.
Offset value for the paper voltage of the secondary transfer bias, First side of thick paper 1 (106 to 163g/m2),
Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-H2 Adjust the offset for paper voltage of the secondary transfer bias on the second side of thick paper.
Offset value for the paper voltage of the secondary transfer bias, First side of thick paper 1 (106 to 163g/m2),
Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-UH1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of super thick paper.
Offset value for the paper voltage of the secondary transfer bias, First side of thick paper 2 (164 to 220g/m2),
Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-UH2 Adjust the offset for paper voltage of the secondary transfer bias on the second side of super thick paper.
Offset value for the paper voltage of the secondary transfer bias, Second side of thick paper 2 (164 to 220g/m2),
Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-N12 Adjust the offset for paper voltage of the secondary transfer bias on the single side or first side of plain paper (600dpi
plain paper, 600dpi thin paper, 600dpi plain paper 2). (Environmental category: 2)
Offset value for the paper voltage of the secondary transfer bias, First side of plain paper, Environmental category: 2
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-N22 Adjust the offset for paper voltage of the secondary transfer bias on the second side of plain paper (600dpi plain paper,
600dpi thin paper, 600dpi plain paper 2). (Environmental category: 2)
Offset value for the paper voltage of the secondary transfer bias, Second side of plain paper, Environmental category: 2
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
2TR-NH12 Adjust the offset for paper voltage of the secondary transfer bias on the single side or first side of plain paper (1200dpi
plain paper, 1200dpi thin paper, 1200dpi plain paper 2, Bond paper). (Environmental category: 2)
Offset value for the paper voltage of the secondary transfer bias, First side of plain paper (1200dpi), Environmental
category: 2
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
COPIER>ADJUST>HV-TR
Sub item Description Level.