Canon iR C2880 series, Руководство по обслуживанию

Страница: 520 / 610

Chapter 17
17-36
13. CST-ADJ
T-17-37
ADJ-C4 Image write position adjustment in main scanning direction when sheets are fed from cassette 4
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-MF Image write position adjustment in main scanning direction when the multi-feeder sheets are fed
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-DK Image write position adjustment in main scanning direction when the paper deck sheets are fed
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-C1RE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in cassette 1 is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-C2RE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in cassette 2 is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-C3RE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in cassette 3 is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-C4RE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in cassette 4 is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-DKRE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in the paper deck is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
ADJ-MFRE Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in the multi-feeder is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]
1
COPIER>ADJUST>CST-ADJ
Sub item Description level.
MF-A4R Used to enter the basic value for the manual feed tray's paper width (A4R).
Adjustment method
- If you have cleared the DC controller PCB's RAM or replaced the DC controller PCB, enter the value on the service
label.
- When replacing the paper width detection VR or registering a new value, perform the following service mode:
FUNCTION>CST.
Adjustment range 0 to 255 [Factory default/After RAM clear: 141]
1
COPIER>ADJUST>FEED-ADJ
Sub item Description level.