Canon iR C2880 series, Руководство по обслуживанию

Страница: 335 / 610

Chapter 10
10-9
T-10-10
*1 Service mode:
COPIER > OPTION > BODY > WUEV-LIV
Default: 15 sec
Setting range: 10 to 600 sec
3. AC Off Mode
The machine remains in this sate when its main power switch remains off. All its power remain off.
10.4.5.2 Power Supply Control
0013-8674
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The machine's power supply conditions are as follows:
T-10-11
10.4.5.3 SNMP setup
0013-8675
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
When the machine is used as a Windows printer, enabling 'Use SNMP' causes the operating system to collect machine status information at specific intervals, pre-
venting the machine from starting a sleep state.
To avoid the situation, disable the setting (Windows' printer properties).
-Disabling 'Use SNMP'
1) Select 'Configure Port' on the Ports screen (printer properties).
Sleep mode Shift The machine moves through different sates in response to the passage of times selected in
Additional Function or in response to a press on the control panel software power switch.
Description In sleep mode 1, the DC controller PCB and the main controller PCB are supplied with
power. In sleep mode 2, the main controller PCB is supplied with power. In both sleep modes
1 and 2, the power to the fixing AC heater is off.
Also, if there is a network communication and RTC communication during the sleep mode
2, the machine can recover without booting the HDD. When booting the HDD, sleep mode
1, the protection time (120 min) to protect the HDD duration number must be retained. Power
consumption can be kept at low level by not booting the HDD.
When there is network communication and RTC communication during sleep mode 2, the
machine recovers as CPU recovery status (without booting HDD). If there is no Network
communication for 15 sec after the recovery of CPU, the machine transits to sleep mode 2.
If there is a network communication during 15 sec after recovery, the machine transits to
sleep mode 2 after service mode setting time (*1) from the last network communication.
Copy / stand-by
mode
Low-power / sleep 1
mode
Sleep 2 mode AC OFF mode
remote 1 ON ON OFF OFF
remote 2 ON OFF OFF OFF
ACC power supply PCB non-all night 24VA ON OFF OFF OFF
Printer power supply PCB non-all night 24VU1 ON OFF OFF OFF
non-all night 24VU2 ON OFF OFF OFF
non-all night 24VU3 ON OFF OFF OFF
all night 13VB ON ON ON OFF
Controller power supply PCB non-all night 24VU1 ON OFF OFF OFF
non-all night 24VU2 ON OFF OFF OFF
non-all night 13VA1 ON ON OFF OFF
non-all night 13VA2 ON OFF OFF OFF
all night 13VB ON ON ON OFF
non-all night 12VA ON ON OFF OFF
non-all night 5VA ON ON OFF OFF
non-all night 3VA ON ON OFF OFF
All-night power supply PCB all night 3VB ON ON ON OFF
G3 FAX accessory non-all night +5V ON ON OFF OFF
all night +5VS ON ON ON OFF
non-all night +3.3V ON ON OFF OFF
all night +3.3VS ON ON ON OFF
FAX accessory non-all night pseudo CI ON OFF OFF OFF