manualshive.com logo in svg

Canon iR C2880 series, Руководство по обслуживанию

Серия устройств Canon iR C2880 - это мощные многофункциональные принтеры, копиры и сканеры для офисного использования. Для получения подробной информации о настройке и обслуживании устройств, вы можете скачать бесплатно сервисный мануал на нашем сайте.

Поделиться
Скачать
background image

Chapter 17

17-77

OF-TSPDF

Time stamped PDF transmission function ON/ OFF in transfer invalidation. 
Switches time stamped PDF transmission function ON/ OFF.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 0]

2

ST-USPDF

Display of installation status of user signature attached PDF transmission function in transfer invalidation.
Displays installation status of user signature attached PDF transmission function.
Setting values
0: No (not installed)
1: Yes (installed)
[Factory settings and after RAM clear: 0]

2

TR-USPDF

User signature attached PDF transmission function transfer licence key acquisition in transfer invalidation
Acquires transfer licence key to allow user signature attached PDF transmission function to be used with another MFP.

2

OF-USPDF

User signature attached PDF transmission function ON/ OFF in transfer invalidation. 
Switches user signature attached PDF transmission function ON/ OFF.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 0]

2

ST-DVPDF

Display of installation status of device signature attached PDF transmission function in transfer invalidation.
Displays installation status of device signature attached PDF transmission function.
Setting values
0: No (not installed)
1: Yes (installed)
[Factory settings and after RAM clear: 0]

2

TR-DVPDF

Device signature attached PDF transmission function transfer licence key acquisition in transfer invalidation
Acquires transfer licence key to allow device signature attached PDF transmission function to be used with another MFP.

2

OF-DVPDF

Device signature attached PDF transmission function ON/ OFF in transfer invalidation. 
Switches device signature attached PDF transmission function ON/ OFF.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 0]

2

ST-SCPDF

Display of installation status of scalable PDF transmission function in transfer invalidation.
Displays installation status of scalable PDF transmission function.
Setting values
0: No (not installed)
1: Yes (installed)
[Factory settings and after RAM clear: 0]

2

TR-SCPDF

Scalable PDF transmission function transfer licence key acquisition in transfer invalidation
Acquires transfer licence key to allow scalable PDF transmission function to be used with another MFP.

2

OF-SCPDF

Scalable PDF transmission function ON/ OFF in transfer invalidation. 
Switches scalable PDF transmission function ON/ OFF.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 0]

2

ST-AMS

Display of installation status of ACQ in transfer invalidation.
Displays installation status of ACQ.
Setting values
0: No (not installed)
1: Yes (installed)
[Factory settings and after RAM clear: 0]

2

TR-AMS

ACQ transfer licence key acquisition in transfer invalidation
Acquires transfer licence key to allow ACQ to be used with another MFP.

2

OF-AMS

ACQ ON/ OFF in transfer invalidation. 
Switches ACQ ON/ OFF.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 0]

2

ST-ERDS

Display of installation status of 3rd party expansion functions for ERDS subsequent to disabling transmission
This displays whether any the 3rd party expansion functions (functions for sending the charge counters to the 3rd party 
charge server) have been installed for ERDS.
Settings
0: OFF (functions not installed)
1: ON (functions installed)
[Factory setting/value after clearing RAM: 0]

2

TR-ERDS

Acquisition of license key for transmitting 3rd party expansion functions for ERDS subsequent to disabling transmission
This acquires the transmission license key in order for the 3rd party expansion functions (functions for sending the charge 
counters to the 3rd party charge server) for ERDS to be used by another MFP.

2

OF-ERDS

ON/OFF of 3rd party expansion functions for ERDS subsequent to disabling transmission
This selects ON or OFF for the 3rd party expansion functions (functions for sending the charge counters to the 3rd party 
charge server) for ERDS.
Settings
0: OFF
1: ON
[Factory setting/value after clearing RAM: 0]

2

COPIER>OPTION>LCNS-TR

Sub item

Description

level.

Содержание iR C2880 series



































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR C2880 series

Pantum P3000 Series Maintenance Manual preview
P3000 Series
Бренд: Pantum Страницы: 94
Ricoh Aficio MP C6503SP User Manual preview
Aficio MP C6503SP
Бренд: Ricoh Страницы: 264
Oki ES5460 User Manual preview
ES5460
Бренд: Oki Страницы: 128
Valentin Compa II Series Operating Manual preview
Compa II Series
Бренд: Valentin Страницы: 110
Star SM-S301 Hardware Manual preview
SM-S301
Бренд: Star Страницы: 24
Citizen iDP-3210 Service Manual preview
iDP-3210
Бренд: Citizen Страницы: 46
Konica Minolta 4556-9598-01A User Manual preview
4556-9598-01A
Бренд: Konica Minolta Страницы: 84
Lexmark 634dte - X B/W Laser Administrator'S Manual preview
634dte - X B/W Laser
Бренд: Lexmark Страницы: 148
EcLine EC-PM-80320D User Manual preview
EC-PM-80320D
Бренд: EcLine Страницы: 72
Lexmark Optra W810 Service Manual preview
Optra W810
Бренд: Lexmark Страницы: 489
Canon iP6310D - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP6310D - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 2
Canon iP5200R - PIXMA Color Inkjet Printer Setup Manual preview
iP5200R - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 76
Canon iRC3380 Before Using Manual preview
iRC3380
Бренд: Canon Страницы: 16
Canon iP6210D - PIXMA Color Inkjet Printer Quick Start Manual preview
iP6210D - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 16
Canon iP8500 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP8500 - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 2
Xerox WorkCentre 7232 Scanner Setup Manual preview
WorkCentre 7232
Бренд: Xerox Страницы: 96
Brother Industries DCP-L2550DW Product Safety Manual preview
DCP-L2550DW
Бренд: Brother Industries Страницы: 22
Samsung PRINTELLIGENSE ML-2245 Specifications preview
PRINTELLIGENSE ML-2245
Бренд: Samsung Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды