Canon iR C2880 series, Руководство по обслуживанию

Страница: 567 / 610

Chapter 17
17-83
17.8 COUNTER (Counter Mode)
17.8.1 COPIER
17.8.1.1 COPIER Table
0014-6141
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The COPIER/COUNTER screen is shown below. The items are described starting on the next page.
F-17-24
Clearing counter values
1) Select the item to clear, displaying it in reverse.
2) Press the clear key on the operation panel.
- The counter is cleared, resetting it to "00000000".
Small size and large size in this mode
- TOTAL/PICKUP/FEEDER/JAM
Large (L) size: Paper larger than A4, LTR size
Small (S) size: A4, LTR size and smaller paper
- DRBL-1/DRBL-2 (PD-PU-RL)
Large (L) size: Paper longer than 324 mm in the feed direction
Small (S) size: Paper 324 mm or shorter in the feed direction
- DRBL-2 (DF-PU-RL, DF-SP-PD)
Large (L) size: Paper longer than the LTR length (216 mm) in the feed direction
Small (S) size: Paper of the LTR length (216 mm) or shorter in the feed direction
Reading counters for consumable parts/parts needing periodic replacement
The copier has special counters (DRBL-1/DRBL-2) that can be used to provide a guideline for when to replace consumable parts or parts needing periodic replace-
ment.
Small size sheets are counted in increments of 1, large size sheets are counted in increments of 2.
[1]: Displays the part name. In this example, the intermediate transfer belt unit.
[2]: Displays the counter value (actual number of sheets used). The value is cleared by pressing the clear key when the part is replaced.
[3]: Displays the limit value (number of sheets as guideline for replacement). You can select the item and change the value with the numeric keypad. After
changing the value, press the OK key.
[4]: Displays the ratio of the counter value to the limit value.
[5]: When the ratio is between 90% and 100%, a single exclamation mark (!) is displayed.
When the ratio is over 100%, two exclamation marks (!!) appear. In the example above, no exclamation marks would appear.
[6]: Displays the predicted number of days until replacement. The example above shows 82 days.
1. TOTAL
T-17-66
<Example>
TR-BELT / 00000201 / 00240000 / 0% !! 000082
[1] [2] [3] [4] [5] [6]
COPIER>COUNTER>TOTAL
Sub item Description level.
SERVICE1 Service total counter 1
Incremented when paper is delivered outside the printer.
(Incremented for both large and small size sheets.)
Returns to "00000000" after reaching "99999999".
1
SERVICE2 Service total counter 2
Incremented when paper is delivered outside the printer.
(Incremented by 2 for large size sheets, and by 1 for small size sheets.)
Returns to "00000000" after reaching "99999999".
1
COPY Total copies counter
Incremented when a copy operation is performed and paper is delivered outside the printer.
Returns to "00000000" after reaching "99999999".
1