Canon iR C2880 series, Руководство по обслуживанию

Страница: 67 / 610

Chapter 2
2-11
F-2-42
6) Attach the cassette size label [1] that matches the selected size of paper to
the front of the cassette.
F-2-43
7) Deposit paper in the cassette; then, slide in the cassette.
8) Perform the same for the other cassette.
9) If a cassette pedestal is used, set it by referring to its Installation
Procedure.
2.2.10 Automatic Gradation Correction
0013-8274
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
For models except ones with DADF, mount the accessory platen cover or the
DADF. When mounting the DADF, be sure to see the installation procedure
for the DADF.
1) Clean the machine's copyboard glass.
2) Place A3, A4, 11X17, or LTR paper in the cassette. (See the instructions
on how to set up the cassette.)
3) Press the [Additional Function].
4) Make the following selections: [adjust/clean] > [auto gradation
correction] > [full correction] > [test print]
- The test print 1 will be printed out.
5) Place the printout of the test print 1 on the copyboard glass as instructed
on the control panel screen.
6) Close the copyboard cover/ DADF.
7) Press [start to read].
- The machine reads the printout of the test print 1.
- When a message appears prompting you to remove the test print, remove
the printout of the test print 1 from the copyboard glass.
8) Press [test print 2].
- The machine prints out the test print 2.
9) Place the printout of the test print 2 on the copyboard glass as instructed
on the control panel scan.
10) Close the copyboard cover/ DADF.
11) Press [start to read].
- The machine reads the print out of the test print 2.
- When a message appears promoting you to remove the test print, remove
the printout of the test print 2 from the copyboard glass.
12) Press [test print 3].
- The machine prints the test print 3.
13) Place the printout of the test print 3 on the copyboard glass as instructed
on the control panel screen.
14) Close the copyboard cover/ DADF.
15) Press [start to read].
- The machine reads the printout of the test print 3.
- The machine issues a message to indicate that it has completed full
correction. In response, remove the printout of the test print 3 form the
copyboard glass.
16) Press the Reset key once to end user mode.
2.2.11 Adjusting the Image Position
0013-8276
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1. Adjusting the Margin (1st side; mechanical adjustment)
1) Make a copy using the cassettes 1 and 2 as the source of paper; then, check
to see that the margin on the front side is 2.5±1.5 mm.
F-2-44
<In the case that the cassette 1, or the cassette 2 is out of specification>
1) In the case of the device with the 2-cassette pedestal, detach the cassette
lower right cover [1].
2) Open the cassette upper right cover [2].
F-2-45
3) Detach the front right cover [1].
- 2 screws [2]
F-2-46
4) Slide out the cassettes 1 and 2.
5) Check the index position [1] on the adjusting plate.
[1]
0
2
4
6
8
10
(–) (+)
2.5±1.5mm
[1]
[2]
[2]
[1]