Canon iR C2880 series, Руководство по обслуживанию

Страница: 515 / 610

Chapter 17
17-31
10. HV-PRI
Primary Charging Assembly Output Adjustment
T-17-34
11. HV-TR
Transfer Charging Assembly / Pre-Transfer Charging Assembly Output Adjustment
T-17-35
MD-OFS-/Y/M/C/K Adjust the color balance of middle density area.
Be sure not to use this item in normal operation. (recommended setting value: -1)
Setting range: -8 to 8
[Factory setting value/Value after RAM clear: 0]
2
HD-OFS-Y/M/C/K Adjust the color balance of high density area.
Be sure not to use this item in normal operation. (recommended setting value: -2)
Setting range: -8 to 8
[Factory setting value/Value after RAM clear: 0]
2
COPIER>ADJUST>HV-PRI
Sub item Description Level.
OFSTAC-Y Offset value for the charging AC current at a constant speed (Y)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-M Offset value for the charging AC current at a constant speed (M)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-C Offset value for the charging AC current at a constant speed (C)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-K Offset value for the charging AC current at a constant speed (K)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-Y2 Offset value for the charging AC current at a 1/2 speed (Y)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-M2 Offset value for the charging AC current at a 1/2 speed (M)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-C2 Offset value for the charging AC current at a 1/2 speed (C)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-K2 Offset value for the charging AC current at a 1/2 speed (K)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-Y3 Offset value for the charging AC current at a 1/4 speed (Y)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-M3 Offset value for the charging AC current at a 1/4 speed (M)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-C3 Offset value for the charging AC current at a 1/4 speed (C)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
OFSTAC-K3 Offset value for the charging AC current at a 1/4 speed (K)
When a sanded image occurs, increase the value until an appropriate image is obtained.
Setting range: 0 to 5 (When incremented by 1, the value changes by 50muA.)
[Factory setting value/Value after RAM clear: 0]
1
COPIER>ADJUST>HV-TR
Sub item Description Level.
2TR-N1 Adjust the offset for paper voltage of the secondary transfer bias on the first side of plain paper (at a constant speed at
600dpi).
Offset value for the paper voltage of the secondary transfer bias, First side of plain paper, Environmental category: 1
When a transfer scattering occurs, increase/decrease the value until an appropriate image is obtained.
Setting range: -128 to 127 (Unit: 20V)
[Factory setting value/Value after RAM clear: 0]
1
COPIER>ADJUST>COLOR
Sub item Description Level.