Canon iR C2880 series, Руководство по обслуживанию

Страница: 365 / 610

Chapter 11
11-3
F-11-2
Memo:
When using SSL, set [Use SSL] ON.
(This setting is also applied to the SSL setting of RUI. Same is true in the case of setting SSL ON on the side of RUI.)
Setting [Use SSL] ON displays the message dialogue 'Changes effective after the main power switch is turned OFF and ON' . Press [OK].
F-11-3
3) Press Done button as many times as necessary until the Basic screen appears.
4) Turn off the device's main power; wait for 10 sec, and then turn the power back on.
- The setting [Use HTTP] is not actually enabled/disabled until you have turned off and then on the device's main power switch.
- You cannot make a connection through a proxy server. If a proxy server is in use, enter the IP address of the MEAP device in the Exceptions field for the
browser. Open Internet Options dialog of Internet Explorer and select Connections tab, LAN Settings button, Use a proxy server option, and Advanced button
of Proxy server group. Proxy Settings dialog will opens. The Exceptions field is in the dialog. As network settings vary among environments, consult the
network administrator.
- If Cookie and JavaScript are not enabled in the Web browser, you will not be able to use SMS.
- To type text using the Web browser, use the characters compatible with the MEAP device's touch panel display. The MEAP device may not properly recognize
some characters.
- When [se SSL] is made available, it is necessary to set the key and the certificate necessary for the SSL communication. Set the key and the certificate by SSL
with [Certificate Settings] that exists in [System Settings] > [Network Settings] > [TCP/IP Settings] on the iR device.
11.1.3 Setting the method to login to SMS
0014-8066
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
SMS Installer Service, which is used to login SMS includes Password Authentication and Remote Login Service Authentication (henceforce: RLS Authentication).
Password Authentication is an authentication method only by password. RLS Authentication is an authentication method using SDL / SSO by ID and password.
Either or both of the authentication methods can be enabled by changing the setting.
Memo:
If Default Authentication is selected as the device authentication method, 'RLS Authentication' is not selectable as SMS Login method. Also, if 'RLS
Authentication' is selected, the device authentication method (Default Authentication, SDL, SSO) cannot be changed.
Setting of login method to SMS (Start/Stop) must be made after logging-in by the other login method. In other words, setting for Start/Stop of Password Authenti-
cation is made after logging-in with RLS Authentication, and setting for Start/Stop of RLS Authentication is made after logging-in with Password Authentication.
The table below shows the setting methods for each combination of login method and Start/Stop.
T-11-8
Start RLS Authentication Stop RLS Authentication
Start Password Authentication Login available with either method Login available only with Password Authentication
Stop Password Authentication Login available only with RLS Authentication Setting unavailable