Campbell LoggerNet, Инструкция по эксплуатации

Страница: 542 / 580

Appendix E. Log Files
TABLE E-1. Transaction Log Messages
User Response to
Code Message Text Message Parameters Message Meaning Message
62 Primary retry
collection
attempt failed
Data collection on the
primary data
collection interval
failed. Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
63 Secondary retry
collection
attempt failed
Data collection on the
secondary data
collection interval
failed. Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
64 Device restore
from file
succeeded On server startup a
device previously
entered in the
network map has
been restored.
65 Device restore
from file failed On server startup a
device in the network
map could not be
restored. This is an indication
that the configuration
file has been corrupted.
Check the network map
and the computer file
system.
66 Device save to
file succeeded The update to the
device configuration
file was successful.
67 Device save to
file failed The update to the
device configuration
file failed. This may be due to a
problem with directory
permissions or a
corrupted directory.
68 Packet delivery
failed Fault code:
1. Incompatible BMP1
device or malformed
packet
2. Routing failure
{unrecognized station
number}
3. Temporarily out of
resources
4. Link failure This is a message
from the RF base
indicating that a
BMP1 message
didn’t make it to the
data logger. Codes 1 and 3 are rare.
If ever seen contact an
application engineer at
Campbell Scientific.
Code 2 indicates that
the RF base has lost the
network map and
doesn’t know how to
route the message. The
server automatically
resends the network
map.
Code 4 is an indication
that the RF base was
not able to
communicate with the
RF modem attached to
the datalogger. These
will happen
occasionally as part of
normal operations.
E-10