Campbell LoggerNet, Инструкция по эксплуатации

Страница: 120 / 580

Section 4. Setting up Datalogger Networks
Using the Scroll Buttons
Navigation buttons that can be used to scroll the model canvas are highlighted
in the image below.
The following buttons and features are associated with this control:
Arrow Buttons –Pressing any arrow button will scroll the drawing canvas
in the direction of the arrow.
Center Button –Pressing the center button will reposition the drawing
canvas at the graph origin.
Collapse Button –The small black arrow in the upper left hand corner of
the scroll button area allows you to hide the navigation buttons. When this
is done, the black arrow will remain but point in the opposite direction
and, if clicked on, will expand the scroll button area.
Using the Model Overview
The model overview is a small square area in the lower right hand corner of the
canvas. If a background bitmap is associated with the model, a miniature
version of that bitmap will appear in the overview. The positions of stations on
the canvas are represented with red dots. A black rectangle is used within this
area to show the current viewing area. If you click the left mouse button while
the pointer is anywhere within this area, the canvas will be scrolled so that the
center of the canvas is positioned relative to the mouse position within the
overview area. If you depress the left mouse button and drag the mouse
pointer, the canvas will be scrolled as you move the mouse. If you click on the
small black arrow on the lower left hand corner of the overview area, most of
the area will be hidden although the arrow will remain with a reversed
direction. Pressing the arrow will make the model overview area visible again.
Using the Station List
If the station list is shown and you select a station in this list, that station will
be selected in the drawing canvas. If the station is not currently visible at that
time. The canvas will be scrolled until the station is shown on the canvas.
4-64