Campbell LoggerNet, Инструкция по эксплуатации

Страница: 132 / 580

Section 4. Setting up Datalogger Networks
This dialog has the following controls:
Model Prefix – This field allows you to enter a string that will be placed at the
beginning of the name for every device in LoggerNet’s network map that the
Network Planner generates. If specified, this value will appear in the names
followed by an underscore character. This feature allows you to use several
different Network Planner models with the same LoggerNet server by keeping
the generated devices separate.
Server Address – This field specifies the IP address or domain name of the
computer that is running the LoggerNet server. In order to configure
LoggerNet on a remote computer, that instance of LoggerNet must allow
remote connections and must also be reachable from the computer hosting the
Network Planner.
User Name & Password – These fields allow you to specify the account that
should be used when connecting to the LoggerNet server. The account used
should have at least
Network Manager
privileges. If security is not
configured on the server, these values will be ignored.
Remember Password – This check box can be checked (the default) if the
user name and password specified should be saved as part of the information
for the LoggerNet device in the model.
Connect – When this button is clicked, the Network Planner will initiate the
connection to the LoggerNet server.
Cancel – If this button is clicked, the configuration dialog will be dismissed
and the configuration attempt cancelled.
4-76