Campbell LoggerNet, Инструкция по эксплуатации, Страница: 534 / 580

Appendix E. Log Files
E.1.2 Enabling Log Files
Use LogTool (Options |Log File Settings) to enable logging of events to files.
If enabled, the server will write log records to text files in the log file directory
using the following file names (depending on the log type):
•
Transaction Log – TranX.log
•
Communications Log – CommsX.log
•
Object State Log – StateX.log
•
Low Level Log – IOXSerial Port_1.log
where “X” is “$” for the currently active file and 0, 1, 2, etc. for archived files.
The server stores the most recent log records in a file that has a $ character in
the place of the version number. When this file grows to the point that it will
exceed the threshold set by the File Size
setting for that log, the server will
rename the log file by replacing the dollar sign with a new version number. At
the same time that the server rolls over to a new log file, the File Count
parameter for that log will also be evaluated. If there are more saved files for
that log than are allowed by the File Count parameter, the server will delete the
oldest of these files until the count is less than or equal to the File Count.
E.1.3 Log File Message Formats
E.1.3.1 General File Format Information
The communications status, transaction, and object state logs all share the same
basic file format. Each record in a log file ends with a carriage return and line
feed. A single record will consist of two or more fields where each field is
surrounded by quotation marks and separated by commas.
The two fields that will be present in all records are:
Timestamp – The server time when the record was generated. It will have the
following format:
YYYY-MM-DD HH:MM:SS.mmm
where “YYYY” is the 4-digit year, “MM” is the month number, “DD” is the
day of the month, “HH” is the hour in the day (24 hour format), “MM” is the
minutes into the hour, “SS” is the seconds into the minute, and “mmm” is the
milliseconds into the second.
Device Name – The name of the device associated with the message. If the
message is associated with the LoggerNet server, this will be an empty string.
E-2