Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 53 / 82

RM2000 Series Installation and Configuration Guide
RM2000 Series Configuration 45
Save Settings in a Template
After completing all configuration settings for the unit currently connected to
your computer, use the following procedure to save configuration settings in a
template. You can use the template to set up another unit of the same type.
Complete the following steps:
1 Click Tools > Advanced > Template > Save to Template to display the Save
Template window.
2 Open an existing folder or create a new folder to store the template.
3 If you want to change the default file name of the template, type a name for
the template in the
File name field making sure to use the .bht file
extension. Click Save when you finish.
Exit UCT and Close the Enclosure
Complete the following steps:
1 Click File > Exit or press Alt + F4 .
2 Disconnect the configuration cable from the unit and your computer.
3 Close and latch the enclosure door.
4 Tighten water-tight fittings on the bottom of the enclosure.
5 Re-enable any synchronization software disabled earlier in this chapter.
The installation and configuration are now complete.