Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 29 / 82

RM2000 Series Installation and Configuration Guide
RM2020 Installation 21
Figure 2-4. Enclosure (Back View)
3 Repeat step 2 to attach the other plastic bracket.
4 Place the enclosure against the flat surface where you will mount it.
5 Mark the mounting hole locations for the plastic brackets.
6 Set the enclosure out of the way.
7 Use a hand drill and a metal, masonry, or wood drilling bit to drill four
holes into the mounting surface where you marked their locations in
step
5 .
8 Place the enclosure back in place where the holes line up and drive in lag
bolts or other appropriate fasteners to hold the enclosure in place.
Installing the Antenna/Surge Arrestor
Complete the following procedure to enable the units for communication with
their satellites.
1 Use two (2) lag bolts to mount the bracket on a pole or other type of
mounting surface.
I
MPORTANT
:
Mount the bracket in a position that allows the antenna to
be located at least two (2) feet above the solar panel and facing in the same
direction as the closest ORBCOMM GES. The antenna must have a clear
line-of-sight with no obstructions, such as trees, hills, or buildings.