Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 52 / 82

RM2000 Series Installation and Configuration Guide
44 RM2000 Series Configuration
5 If you want an alarm transmitted when the unit is in a low state (closed),
click
Transmit Low/Closed Alarm check box.
6 If you want an alarm transmitted when the unit is in a high state (open),
click
Transmit High/Open Alarm check box.
7 Click Validate/Check Entries to verify configuration settings are correct
and then click Save .
Text boxes display green or red to indicate whether or not an entered value
is correct. If a text box is red, enter a different value and then validate
again. If all text boxes are green, settings are correct.
Save Settings in the Event Log
To save configuration settings, click File > Save Current Setup in Event Log .
N
OTE
:
The Event Log is used later when setting up the unit on the BAT website.
The file saves on your hard drive in the same folder as the UCT software. The
UCT software automatically assigns a file name using the unit serial number.bhs
extension.
Transmit a Test Packet
To transmit a test packet, click Transmit in Communication Settings.
Status messages display in the window beside the Transmit button. When the
status message
Acknowledgement received from server appears, communication
has been established.
I
MPORTANT
:
If the status message Test Packet Return Transmission Failed
appears, communication has not been established with the server. Click Transmit
again to send another test packet. If communication cannot be established after
several attempts, please call Technical Support for assistance.