Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 43 / 82

RM2000 Series Installation and Configuration Guide
RM2000 Series Configuration 35
Figure 3-3. Example of Channel 1 (CH1) Millivolt Settings
2 Click Enable , Analog , and +/– 50mV to enable the channel for service and
millivolt readings.
3 Type the unit of measurement used by the input device in the Engineering
Units (on transducer) field.
4 Scale the input channel and input device as follows:
a Type the minimum and maximum voltage level supported by the
input channel in the top and bottom fields of
Raw voltage values (on
unit input) , respectively.
For example, to have the input channel read a rectifier shunt with a
rating of 0–75 amps, type zero (0) in the top text box and fifty (50) in the
bottom text box.
b Type the minimum and maximum voltage level supported by the
input device in the top and bottom fields of
Engineering Units (on
transducer) , respectively.
For example, to have the input channel read a rectifier shunt with a
rating of 0–75 amps, type zero (0) in the top text box and seventy-five
(75) in the bottom text box.