Bullhorn RM2000 Series, Руководство по установке и настройке

Страница: 38 / 82

RM2000 Series Installation and Configuration Guide
30 RM2000 Series Configuration
9 Transmit a test packet (page 44).
10 Save settings in a template (page 45).
11 Exit UCT and close the enclosure (page 45).
Disable Synchronization Software
If you use a synchronization software to synchronize a mobile device with your
computer, temporarily disable the software before starting UCT.
I
MPORTANT
:
If you are working with a Bullhorn unit that includes a USB
configuration port on the faceplate, install the USB device driver provided on the
CD in the installation kit. The USB device driver must be installed prior to
connecting the unit to your computer.
If you use Microsoft ActiveSync to synchronize the Allegro field computer with
your computer, complete the following steps to temporarily disable the software:
1 Click Start > Programs > Microsoft ActiveSync .
2 Click File > Connection Settings . If enabled, click to remove the check
mark and disable COM port, USB, and network options.
3 Click OK to close Connection Settings .
4 Click File > Close to exit ActiveSync.
Connect the Unit and Start UCT
Complete the following steps:
1 Connect the configuration cable in the USB port of your computer. Connect
the other end of the cable in the configuration port of the unit.
2 Double-click the UCT icon on the desktop to start the UCT software. Or
click
Start > Programs > Configuration Toolkit .
3 Select a unit in the drop-down list of the Find Devices window (Figure 3-1)
and then click
Select .